|
| |
|
Instruction of Multifunction Heat Press Transfer |
|
1)
Use Photoshop,
Illustrator, CorelDraw or others software to edit image |
2)Use (Epson C88) sublimation ink
to print images on the shiny side of sublimation transfer
paper.
Set printing setups to "Mirror Image", "Best
Photo", "Plain paper".
Wait until the ink dries and then make the transfer. |
 |
3)Changing heat press part, make sure
the connection is correct and tight
4)Adjust pressure, turn the knob at bottom of the machine. Use medial
pressure and not too tight, for mug and plate, which may otherwise break
when heating if the pressure was too high
|
|
6)For mug: Tape image to
the mug using small
pieces of tape on each side of the transfer, When cutting the transfer to
fit the mug, be sure to leave ¼" on the top and bottom of mug and ½" on
the left and right of the handle. Wrap mug and transfer with Teflon
sheet. Set temperature and timer to 180C and 50 Sec
Plate: Put image on the centre of plate and then cover Teflon sheet. Set
temperature and timer to 200C,100Sec
Key Chain: Put high temperature rubber under key
Chain, put transfer on
key Chain then cover a small rubber.
doing that is to keep flat level, When transfer. Set temperature and
timer : 210C, 100Sec
Mouse pad: Put transfer on desired place then cover Teflon sheet. Set
temperature and timer :200C, 20Sec
* These are not absolute temperatures and times.
You will have to do adjust for different objects when doing actually transfers.
|
|
7) Mug, Plate, Key
Chain: Push down the press handle and turn on power switch. Press ＾timer stop￣ button to stop timer count
and the
temperature of heater will start to rise. When the actual temperature
reached set temperature, the timer becomes active will start
counting. When the timer reached set second, the buzzer sounds. Turn off
the power, lift the handle and remove the object. Waiting 20 second or more
before peeling the transfer paper. If you peel the transfer paper too
early, before the transfer process is complete, the image may be easily
ruined. Mouse pad:
Turn on power switch. Wait until the temperature reach the set temperature, close
the handle and click the
power switch( fast turn off then turn on power switch one time). The
timer will start to count. When the buzzer sounds, open handle and peel
transfer paper.
|
|
 |
 |
The multifunctional machine can
used on a variety of
stuffs.
Signs, Apparel, Weddings, Glass Plaques, Memory Boxes, Tote Bags, Car
Flags, Coffee Mugs, Key Chains
Place Mats, Switch Covers, Mouse Pads, Coasters |
| |
|
