How to cut logo (1)

1) Design Logo

2) Draw a rectangle around logos, the 4 lines of rectangle near the logos more than 2mm at least

3) Print the logos on dark transfer (inkjet printer)

4) Use a hair dryer to make ink dry fast when finished printing.
Cut adhesive moving film according to the size of the whole image and stick to it. Press hard.

5) Place transfer paper on cutting plotter. Adjust the horizon level of the image: keep point A and B at one horizontal line.
1- Move the tool by button or by hand to point A as it shows in the pictures above.
2- See whether point A and B at one horizontal line by eyes.
3- Hold transfer paper by fingers, move tool to point B to check whether it aims at B. If not, adjust the transfer paper until A and B is at one line.
4- Press pinch roller。 Move blade point to A (the corner of line)  ,the preparations for cutting plotter is done.