|
Features
This machine adopt wave length 365nm UV tube, it has
a strong penetrating power and suitable for more than 80% of UV curing
products.
This machine is mainly used for exposing in screen printing, pad
printing and stamping .
Exposing effective size: 60*76 cm
Roller installed desktop mobile exposing
Double row dedicated UV LED lamp bead lasts for 50,000 hours
Countdown timer Setting is simple and automatically save setting data
Methods of using the timer
1. Before using, please press the "C" button to reset, the display
shows
00:00 00 and it is flashing
state.
2. Press the "hour" and "minute"
and "second" button separately to set
the countdown of the
electrify time, the display shows "ON"
3. Press the "start/pause"
button to start the countdown.
For example: set exposure
time 5 minutes 30 seconds :
At first press the "C" button to
remove the original set ; Then press
"minute" set to"5"; press
"seconds" set to "30"; Then press the
"start/pause"
to start the countdown, lamp open;
After five
minute 30 seconds countdown , plate burning machine tube
closed.
This setting
do not need to change, it is automatically saved.
When the
machine starts again, the countdown is still 5 minutes and
30 seconds.
Basic parameters of the timer:
Countdown: 1 SEC - 99 hours 59
minutes and 59 seconds
Working
temperature: - 25 c - 65 c Parameter
Parameter
UV tube： 8pcs, each piece is 18W
wave length : 395nm
Exposing effective size: 23.6*30in (60*76 cm )
Machine height is adjustable, distance from heating box to the ground is
min70mm. (2.75in )
|
