 |
|
Portable Air Duct Cleaning Machine 220V |
|
|
|
|
|
|
 |
|
Product
Overview |
|
The portable air duct cleaning machine is a
pipe cleaning device that carries a power rotating brush head. It is
easy for a single person to move and operate. It is used for physically
rotate inside the air duct system to achieve the purposes of cleaning
the duct, improving the indoor air quality and enhancing the system
efficiency. The portable air duct cleaning machine has the advantages of
relatively small size, light weight, convenient and quick movement and
rapid deployment. |
|
Product
Parameters |
|
Voltage |
220V Single-phase electricity
(Give a 110V transformer as a gift.) |
|
Power |
550W |
|
Rotating speed |
0-1400r/min |
|
Length of flexible shaft |
15M |
|
Applicable pipeline diameter |
50-1000mm |
|
Brush |
4 pcs (300mm, 400mm, 600mm and 800mm) |
|
Size of main machine |
26.5*41*26cm (10.4*16.1*10.2 inches)
(There may be an error caused by manual
measurement.) |
|
 |
|
Attention |
|
1. If your power supply voltage is 110V,
please connect the device to the provided transformer, and then connect
the transformer to the 110V power supply. |
|
2. The flexible shaft must be fully unfolded
before the machine is powered on to rotate. If the machine is powered on
and rotates under the condition that the flexible shaft is not fully
unfolded, the flexible shaft will be twisted off. For the equipment
damage caused by this incorrect operation, customers need to purchase
accessories at their own expense. |
|
3. The rotating speed should be adjusted
from slow to fast. Do not directly adjust the high speed for rotation so
as to prevent damage to the equipment. |
|
4. For the safety of product transportation,
the remote control is not equipped with batteries. Customers need to
bring their own batteries. |
|
5. Before operation, please be sure to wear
goggles and protective gloves, and tidy up your hair and clothes to
prevent the risk of entanglement. Do not touch the flexible shaft and
brush head in the rotating state to prevent danger when the machine is
powered on. |
|
6. Place the equipment in a stable place for
operation, and keep the equipment and plug dry. |
|
7. Do not use this machine when the ambient
temperature is above 40˚C. |
|
Product
Features |
|
|
| The
machine is suitable for cleaning operation of circular and
rectangular pipelines with the diameter of 50-1000mm. The
cleaning effect is good, operation is easy and convenient, and
the application range is wide. |
|
As a professional
cleaning device, the portable air duct cleaning machine can be
used for cleaning various pipelines, such as material conveying
pipes, flour mill pipes, ventilation pipelines and air ducts in
hospitals, schools, hotels, etc. |
|
|
|
|
|
| The
cleaning brush supports the double modes of forward and reverse
rotation, and the double rotation methods ensure that the
pipeline is clean without any dead corners. |
|
The machine is
equipped with a remote control, manual and remote dual control
can be achieved, and it is convenient for single person
operation. |
|
|
|
|
|
| The
rotating speed can be adjusted through the speed regulator and
is matched with bristle brushes for cleaning, so that cleaning
is free of residues. |
|
The 15 meter
flexible shaft can be stretched to support long-distance
operation and cooperate with different cleaning brushes to
achieve perfect cleaning. |
|
|
Operation
Method |
|
1. Remove all the strapping strips on the
flexible shaft, fully stretch the flexible shaft and then connect one
end of the flexible shaft to the main machine. |
|
2. Connect a cleaning brush with the
appropriate size to the other end of the flexible shaft and fix them
with screws. |
|
3. Connect the power cord to the main
machine, turn on the power to start the machine, select the
manual/remote control mode, adjust the rotating speed, and select the
forward/reverse rotation. |
|
4. In case of emergency, please press the
emergency stop switch to power off the machine emergently. |
|
Product
Display |
 |
 |
 |
|
Item Number (022836): 1 x
Portable Air Duct Cleaning Machine 220V |
|
|
You can make
order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost. |
