|
|
新建网页 1
|
WM210V Inch Precision
Length Metal Bench Lathe 8"*39" 1100W |
Miniature lathe is mainly used for
processing the end face of various rotary surfaces and rotating
bodies. For example, turning inside and outside cylindrical
surface, cone surface, ring groove and forming turning surface,
turning end face and all kinds of commonly used cone surface,
ring groove and forming turning surface, turning end face and
all kinds of commonly used inch thread.
This new lathe has a center distance of 39.4", which is longer
than any other lathe on the market, making it easy to process
long pieces! |
| Model: |
WM210V |
| Voltage: |
AC110V 50/60Hz(Brushless
Motor) |
| Power: |
1100W(1.5HP) |
| Length of center: |
39.37"(1000mm) |
| Swing Over Bed: |
8.27"(210mm) |
| Concentricity tolerance: |
0.03mm-0.05mm |
| Rotary diameter of tool
rest: |
5.51"(140mm) |
| Spindle bore: |
1.26"(32mm) |
| Max clamping diameter of
chuck: |
4.92"(125mm) |
| Width of lathe bed: |
3.94"(100mm) |
| Thread standard: |
Inch screw thread |
| Number of Spindle
Speeds: |
Infinitely variable
speeds |
| Range of Inch Threads: |
10-44T.P.I |
| Range of metric threads: |
0.3mm-3mm |
| Spindle taper: |
MT5 |
| Knife rest labour: |
Horizontal four-station |
| Spindle rotation speed: |
50-2500rpm |
| Precision of the
spindle: |
0.01mm |
| Automatic feed range: |
0.1mm-0.2mm |
| Tail frame taper: |
MT2 |
| Maximum stroke of tool
rest plate: |
2.16"(55mm) |
| Maximum stroke of middle
plate: |
2.95"(75mm) |
| Maximum stroke of bottom
plate: |
26.77"(680mm) |
| Maximum stroke of
tailstock sleeve: |
2.36"(60mm) |
| Package size: |
57.9"*18.5"*20.1"(147cm*47cm*51cm) |
| Net weight/Gross weight: |
178.6LB(81kg)/238.1LB(108kg) |
| Product Features & Advantages |
 |
Control Panel
Spindle rotation
speed is divided
into two adjustable gears:50-1250
rpm and 1250-2500rpm. Panel can
observe the rotation speed in real
time, which is convenient and
flexible. |
|
Accurate
Tailstock
Tailstock is
movable and fixed,
with a maximum center distance
of 39.4" at the far right. With the
MT#2 taper in tailstock spindle,
this lathe is capable of adjusting
set screws for accurate operation. |
 |
 |
Belt & Gear
Belt drives the
spindle to rotate,
and the speed is adjusted more
accurately. Powder metallurgy
gear, not easy to break teeth,
low noise, replacement gear can
process different threads. |
|
4-way Tool Post
The adjustable
4-way tool post
on the lathe allows you to easily
change your cutting tools. The 8
screws allow you to better grip
the tool and finish the machining
efficiently.
|
 |
 |
Switch
Lathe above the
design of forward
and reverse switch and start &
emergency stop switch, easy to
operate, in case of emergency can
immediately cut off the power
supply, to ensure personal safety. |
|
Metric Scale
Precise metric
scale are provided
on the saddle handle ,the tailstock
handle and the movable center,
allowing for more accurate and
professional work. If you need the
inch scale can be customized. |
 |
 |
Lead Screw
Adopts lead screw
drive structure; It has the advantages of excellent impact
resistance, high reliability, high precision, convenient
maintenance and easy replacement. Ensure machining accuracy and
efficiency. |
|
Wide Application
This lathe can be
used for turning
end face, internal and external
thread, Buddha beads, as well as
drilling, chamfering, cutting and
other processing. Can meet most
of your DIY processing needs.
|
 |
- High quality cast iron bed after high
frequency quenching process and precision grinding
- The spindle rotation speed is divided into two levels in the
range of 50-2500rpm, which can be adjusted continuously
- Brushless motor has strong power, low noise and saves energy
consumption
- High precision spindle, high quality bearing, high accuracy,
wear resistance, long life
- With one button start and stop switch and forward and reverse
switch |
| Product Presentation & Details |
| WM210V lathe *1 |
Base oil pan *1 |
English manual *1 |
| Oil can *1 |
Hexagon wrench *5 |
Fork wrench *2 |
| The screwdriver *2 |
Chuck jaw *3 |
Chuck spanner *1 |
| Metal gear
*12(24/30/40/48/50/52/60/60/66/70/72/75) |
Fuse *1 |
|
|
You can
make order with no worry.
Any concern just feel free to let us know, we'll reply in 24
hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days
after payments cleared. Orders are processed from Monday-Friday;
Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the
consumables.
We stand behind our products all the item, so even if your
warranty period has expired, you can still seek for service or
technical support from us with low cost. |
|
