Automatic Edge Banding Machine 110V

The multi-function sealing and repairing machine is mainly used for sealing the edge of the plate section. It has compact structure, reasonable layout, beautiful appearance, with curved edge sealing, double-sided gluing, automatic tape breaking, trim neatly head and tail, automatic plate feeding, upper and lower trimming, double-sided polishing and other functions.

Voltage: 110V

Edge speed:0-19.7ft/min（ 0-6m/min）

Self-propelled motor power: 60W

Conveyor motor power: 25W

Polishing motor power: 180W*2

Edge cutting machine power: 650W

Edge thickness: 0.03-0.05in （0.8-1.5mm）

Edge height: 0.4-1.4in（10-36mm）

Heating time: 5-15min

Adhesive volume: 0.16Gal （600ml）

Trimming method: Double-sided trimming

Adhesion method: Double-sided adhesive coating

Control mode: Intelligent temperature control

Disconnection mode: Automatic strip breaking

1. First of all, it can be directly applied to the plate straight line and arc irregular border sealing operation, and the portable edge sealing machine is also suitable for a variety of different materials of the edge sealing tape.

2. Multi-functional microcomputer sealing machine through the special structural design, can make the plate with the edge sealing machine tape at the same time, to ensure that the paste is more uniform, more firm, the edge sealing effect is more perfect. The special design of the glue pot increases the volume of the glue pot and greatly reduces the preheating time, which can ensure sufficient melting amount.

3. Manual feeding coupled with manual control and motorized roller pressure mode can accurately and quickly carry out the edge sealing process, each part of the work design is strict and orderly, no degumming overflow phenomenon.

Scope of use：

Suitable for side sealing: flexible melamine-impregnated paper, wood veneer, plastic and other furniture edge sealing materials, the rubber surface must be smooth.

Details:

Usage method：
1. Connect the power supply.
2. Adjust the height of the edge banding strip inlet, edge banding speed, etc. properly.
3. After turning on the machine, it takes about 10 minutes for the temperature of the hot melt adhesive to reach the set temperature of 170℃.
4. Start edge banding.

Notes：
1. Start edge banding only after the temperature reaches the set temperature.
2. When the machine is heating, do not put your hand into the edge strip groove to avoid burns.
3. During use, do not set the moving speed of the micro edge banding machine too fast or too slow. It should be controlled within an appropriate range.

You can make order with no worry.
Any concerns just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.