|
|
Product Overview
| Our product has two major features:
I.High-precision optical fiber sensor;
II.Automatic conveyor belt with adjustable running speed. The
application range of this equipment is not only applying
filling, but also vibrating tray, granule dispenser, marking
machine, cap screwing machine and so on. Simple operation,
precise control, DC power supply, safety and efficiency, improve
work efficiency, save worry and effort. |
| Voltage: |
AC100-240V |
| Conveyor
belt length: |
23.62" (60cm) |
| Receiving
tray: |
7.87"*3.93"(20cm*10cm) |
| Height of
filling stand: |
15.75"(40cm)
(height-adjustable) |
| Controller
size: |
4.53"*3.03"*1.18"(11.5cm*7.7cm*3cm) |
| Conveyor
belt: |
Green, waterproof |
| Conveyor
speed: |
10 cm/s(adjustable) |
| Conveyor
belt tension: |
13.2Lbs(6kg) |
| Main
material of conveyor belt: |
304 stainless steel |
| Sensor type: |
NPN type three-wire
fiber optic sensor |
| Applicable
bottle diameter: |
3.54"(9cm) |
| Package size: |
26.38"*6.69"*7.09"(67cm*17cm*18cm) |
| Net weight/Gross weight: |
6.86lbs(3.11kg)/8.53lbs(3.87kg) |
| Product Features & Advantages |
 |
SET: Press once to enter the
work time setting, then press save and exit
MOVE: After entering the working
time setting, press once to switch the time to be set
ADD&UNIT: During the work time
setting, this button is used to adjust the value. In standby
mode, this button switches the decimal point unit.(Work
time: The sensor senses the object and transmits the stop
running time, which is generally recommended to be the same
as the filling time)
COUNTER: Number of runs
SENSOR SWITCH: Press the sensor to work, turn off to
stop working
POWER SWITCH: Press and turn on the controller
SENSOR: Support three-wire NPN sensor.
Brown: positive electrode
Black: signal
Blue: negative electrode
CONVEYOR: Support 12V power
supply conveyor belt
POWER: 12-15V DC power input
CONTROL: Connection of third-party filling machines
with footswitch interface
|
Stainless Steel Body:
● Water-proof
● Flat
● Cost-saving
PVC Conveyor Belt:
● Durable
● Corrosion-resistant
● Easy to clean
|
 |
 |
Double Guardrail:
The double guardrail on both sides of
the conveyor belt can play a role in stabilizing the
material, avoiding the material slip and deviation, and
ensuring that the material can be stably transported to the
destination. At the same time, it effectively prevents
workers from putting their hands into the equipment
accidentally, which may cause injuries.
|
Optical fiber sensor:
Equipped with optical fiber probe, with
filling liquid positioning function, simple operation,
precise control, DC power supply, safe and efficient.
|
 |
| Suitable for
the following types |
A. DC low voltage control mode,
It is generally used in filling machines with universal controllers.
This foot switch has the following two conditions:
a. Step down do not loosen, filling machine only fill once,
b. step down do not loosen, filling machine
continuous filling.
B. AC high pressure control mode, generally used in pneumatic piston
filling machine, which requires an additional DC controlled AC contactor
to complete compatibility
C. Pneumatic control mode, generally used in pneumatic filling machine
This kind of foot switch is to control the pressure valve to make the
filling machine work, and another pneumatic solenoid valve is needed to
replace the foot switch control.
This controller slave foot pedal
can provide three signals
A. The relay is continuously closed during working hours
When the foot switch is pressed, the filling machine is only
filled once.
B. During the working time, the
relay is closed for about 0.5 seconds and disconnected
It is suitable for the filling machine that does not loosen
the continuous filling when the foot switch is stepped on.
C. During the work time, the output
DC voltage is 12V and disconnected for about 0.5 seconds
Suitable for pneumatic filling machine,
AC foot switch requires a 12V DC AC contactor (self-provided)
Pneumatic foot switch needs to add a 12V DC pneumatic
solenoid valve (self-provided) |
|
- Supports linkage
with devices with foot switches
- Foot switchgear that supports wiring
- Pedal switchgear to support the pipe (need to add a DC12V pneumatic
solenoid valve)
- The sensor delay time effectively solves the problem of multiple
induction filling in the same bottle
- Counter function, cumulative number of work
- Support filling machine, particle separator, laser engraving machine,
capping machine, etc
- Support pneumatic lifting control
- Support DC12V conveyor belt linkage
- Support induction filling
- Support automatic mode
- Support automatic feed mode
- Support automatic counting function, to the specified number, the
conveyor belt stop intermittently
- Support automatic cycle operation mode |
| Product Presentation & Details |
| Small Belt Conveyor *1 |
Accessories package *1 |
English manual *1 |
|
You can
make order with no worry.
Any concern just feel free to let us know, we'll reply in 24
hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days
after payments cleared. Orders are processed from Monday-Friday;
Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the
consumables.
We stand behind our products all the item, so even if your
warranty period has expired, you can still seek for service or
technical support from us with low cost. |
|
