|
|
Product Overview
|
1-1/4" Electric
Rebar Bending
and Cutting Machine
3
Feet Controls 110V 3000W |
| The rebar bender machine can bend
1/4''(#2) to 1-1/4"(#8)(6 to 32 mm) rebar to 0-180° in 4
seconds. Add cutting function below, can cut the steel bar, 4.5 seconds to
cut through a piece of steel. Three standard foot pedal control switches for hands-free
bending and cutting. It is widely used in construction engineering, used to
bend round steel, rebar, screw and so on, the machine can be
batch operation.Built-in safety device can stop operation
immediately. |
|
Model: |
RBC-32 |
|
Voltage: |
110V |
|
Power: |
3000W |
|
Bending Angle: |
0-180° |
|
Max.Rebar Diameter: |
1-1/4"(32mm #10 Grade 60) |
|
Min.Rebar Diameter: |
1/4"(6mm #2 Grade 60) |
|
Bending Speed: |
4
Seconds |
|
Cutting
Speed: |
4.5 Seconds |
|
Amps: |
27A |
|
Max.Rebar Hardness: |
HRC30 |
|
Bending Radius: |
1.97"(50mm) |
|
Noise: |
105dB(A) |
|
Certificate: |
CE RoHS PSE KC |
|
Shell Material: |
Iron |
| Package size: |
29.5"*25.5"*46"
(75cm*65cm*117cm) |
| Net weight/Gross weight: |
544LBS(247kg) /
600LBS(272.5kg) |
| Product Features & Advantages |
|
4.Steel
Idler Wheel:
The
high-strength steel Idler Wheel is made of 40 chromium with
a thickened design is more firm and hard to break the shaft.
Smooth surface treatment, easier to bend steel.
|
5.Fixed Device:
The fixed device can be
adjusted by moving back and forth, and the steel bar can be
fixed flexibly and easily bent. Lifting bolt screws are
convenient for moving the machine.
|
6.Vent Hole:
There are a large number of
air vents on the left and right sides, which can discharge
the excess heat generated by the pump body in time, prevent
the temperature from being too high, and protect the pump
body and seals.
|
 |
 |
 |
7.Foot
Switch:
Through foot switchs can
control the preset bending Angle and cutting function, just step on the foot
switch can quickly bend the steel bar, the operation design
is humanized.
|
8.Wide
Application Scenarios:
Widely used in construction
sites, railway and bridge construction, production
workshops, etc.
|
9.Wide Range of Application:
It can bend 6-32mm rebar, round steel, medium
carbon steel, low carbon steel and other materials.
|
| - 3000W high-power pure
copper coil motor, smooth operation, low noise, long life,
higher work efficiency. -
The bending speed and cutting speed are super fast, which can
complete the bending of a steel bar in 4s, and complete
the cutting of a steel bar in 4.5s, saving time.
- The bar bender machine adopts
a sturdy iron machine body and durable Idler Wheel. Moreover, it
can stand super-hard rebar with strong clamping force, which can
help to reduce steel rebar waste.
- This rod bending machine has
two slide-type angle selectors, which can help you accurately
bend any angle from 0-180 degrees. Preset angle locks are
designed for repeating the same angle bending.
- Foot switch design,
convenient and efficient bending. With four handles on the
corner for you to transport and operate effortlessly. |
| Product Presentation & Details |
|
Rebar bending and cutting machine *1 |
|
English manual *1 |
|
Foot switch *3 |
|
Hex wrench *1 |
|
You can
make order with no worry.
Any concern just feel free to let us know, we'll reply in 24
hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days
after payments cleared. Orders are processed from Monday-Friday;
Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the
consumables.
We stand behind our products all the item, so even if your
warranty period has expired, you can still seek for service or
technical support from us with low cost. |
|
