1. Read all instructions before using the machine.

2. Keep children and visitors away from the working area.

3. Always wear protective gloves, goggles and face mask or dust mask if operation is dusty.

4. Remove drill chucks and wrenches from the machine tool before starting.

5. Ensure the drill bit or other cutters are securely clamped.

6. During operation, keep the body balanced, stand stably, and do not touch the running parts.
　

2. Simple operation: The machine is easy to operate, and even unskilled workers can operate it.

3. High machining precision: By adjusting the copper nuts to adjust the clearance of the screw thread, the wear of the machine tool can be reduced, thereby improving the machining accuracy.

4. High stability: The machine tool is equipped with a hard and stable stand column, the machine tool has good stability and high machining accuracy.

5. Good adjustability: The spindle speed and height are adjustable, the tapping depth is controllable, and the spindle head can rotate by ±45 degrees.

6. Wide application: The machine tool is ideal for a wide range of applications including metal fabrication, automotive repair, construction sites, etc. It can process the steel, aluminum, composites and metal parts with the appropriate tooling.

Induction Motor

The 1.5KW high-quality induction motor has stable performance and low fault rate, achieves high-power output for large-diameter drilling, heavy-load milling and high-strength tapping operation and provides a quick response, stable transmission and smooth start.
　

Operation Panel

The operation panel takes the operation convenience and safe reliability into account, has clear and visual function division, and achieves independent control over the equipment start, reverse rotation, emergency stop, mode selection and water pump.
　

Lifting Handle

The lifting handle is designed for effectively controlling the spindle to ascend and descend, is firm and reliable, easy to operate and not prone to deformation or breakage, meets the ergonomic standard and improves the operation comfort and efficiency.
　

Spindle Feed Handle

The spindle feed handle is used to achieve free and controllable feeding of the spindle, the feeding amount can be precisely controlled through the clear scale marks, and the surface quality and dimensional accuracy of deep hole machining and precision cutting are ensured.
　

Spindle Speed Handwheel

The spindle speed adjusting handwheel has clear scale marks and pointer indication, can achieve quick and accurate speed regulation, can be smoothly rotated, saves time and labor and improves the operation efficiency.

Spindle Head

The spindle head has high precision, high stability and vibration resistance, can bear high cutting force and impact load, achieves quick clamping of drill bits, milling cutters, screw taps and other cutters, and has high universality.
　

Workbenches

The double workbenches are subjected to accurate grinding treatment, ensuring high structural strength and stability. The upper workbench can be controlled with handwheels to move horizontally so as to achieve machining.
　

Cooling Pump

The cooling pump is designed for achieving efficient cooling and circulation, preventing the cutters from overheating and wear and prolonging the service life of the cutters. It adopts the waterproof and dustproof design and has good environmental adaptability.
　

Before operation, check all components and safety protection facilities.

1. Use of the host part
(1) Loosen the locking screw on the connecting base, rotate the lifting handle, adjust the spindle box up and down, select the height as needed, and after determining the height, tighten the locking screw to prevent vibration.
(2) Loosen the three M16 nuts on the connecting base, and the spindle box can rotate freely at 45 degrees. Select the angle as needed, and after determining the angle, tighten the nut.
(3) The spindle micro-feed handle is used for spindle micro-feeding.
(4) Adjust the positioning block to control the cutting depth.
(5) Adjust the front-and-rear travel of the workbench through the workbench feeding handwheel.
(6) Select the type of dial according to the cutting needs.

2. Drilling operation
(1) Drill a blind hole (not punch through the workpiece), loosen the locking bolts to separate the worm gear from the spring base, and then adjust the scale of the positioning block so that the scale is exactly matched with the distance between the drill tip and the bottom of the hole.
(2) Drill a through hole (punch through the workpiece), and raise the scale of the positioning block to the highest position.

3. Milling operation
(1) Adjust the positioning block to the highest position.
(2) Use the spindle feed handle to adjust the milling cutter to the correct height as needed, and then tighten the handle to match the worm gear cone with the spring base.
(3) Adjust the machining depth through the micro-feed handle.
(4) At this position, lock the toothed sleeve with a fixing bolt.
(5) During longitudinal feed milling, adjust the two longitudinal limit blocks in front of the workbench to limit the longitudinal travel of the workbench. Lock the middle drag plate with two insert strip locking screws on the right side of the middle drag plate to improve the machining accuracy.
(6) During transverse feed milling, tighten the two insert strip locking screws in front of the middle drag plate to lock the workbench so as to improve the machining accuracy.

4. Tapping
(1) Loosen the locking bolt in the middle of the spindle feed handle.
(2) Adjust the positioning block to the desired height.
(3) After leaving the upper limit position, the machine tool can conduct reverse rotation by pressing the reverse switch or touching the lower limit position.

5. Adjustment
(1) Adjust the limit blocks in front of the workbench for longitudinal feed limit.
(2) Adjust the insert strip adjustment screws at both ends of the insert strip to adjust the longitudinal and transverse direction or spindle head dovetail guide fit clearance.
(3) Rotate the insert strip bolts clockwise to tighten the insert strip. Rotate the screw counterclockwise to loosen the insert strip.
(4) Adjust the insert strip screw until the workbench can move easily and freely.
(5) Adjust the M5 adjustment screws on the longitudinal and transverse screw nuts until the lead screw can rotate flexibly while minimizing the fit clearance between the screw nuts.

6. Speed regulation
When shifting gears, firstly, stop the motor, turn the gear lever to the appropriate position according to the required speed, and then start the machine.

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.