Heavy-duty: ≤2in (50mm)

2. The power supply must comply with the specifications on the motor nameplate, and must be reliably grounded with good insulation.

3. Do not use the machine in highly corrosive, rainy, or flammable/explosive environments.

4. During operation, do not touch rotating parts, and do not put hands or tools into the machine.

5. Overloading is strictly prohibited. Never leave the machine unattended while it is running.

6. When installing tools, leave sufficient safe clearance (i.e., idle travel) to avoid tool collisions.

7. Clean away iron chips timely during cutting, and cool the tools adequately with a special coolant.

8. When working near the machine, the operator should wear safety goggles and ear protectors at all times.

2. Simple Structure: The machine is simple in structure, reducing the machine's complexity by 40%, greatly improving the replaceability of parts and components.

3. Multiple Functions: It has powerful functions and can perform pipe cutting and beveling simultaneously, significantly improving the work efficiency.

4. Good Combination: The preloaded adjustable bearing is combined with a reinforced bottom bearing housing ring, enhancing the stability and operational performance of the machine to the maximum extent.

5. Reliable Performance: The clamping system can securely grip the pipe reliably.

Blade Holder Assembly

The independent blade holder structure is adopted, allowing quick assembly, disassembly and replacement of different cutting and beveling blades and greatly improving the positioning precision and adaptability. It is resistant to wear, impact and deformation and further improves the cutting stability.
　

Driving Connector

The driving connector is of an integrated precise machining structure, can achieve rigid connection of the driving part and the cutter head and ensures high-precision processing of the beveling angle and end face. The reinforced structural design improves the structural strength and stability.
　

Feeding Mechanism

The feeding mechanism can be adjusted to achieve precise control over the cutting depth and precision, well adapts to the flexible demands of the on-site operation, and effectively avoids tool collision and jam.
　

Clamping Mechanism

The clamping mechanism can be adjusted to clamp, position and fix the pipe to ensure the processing coaxility. Multiple clamping jaws can be adjusted effortlessly to adapt to different pipes, and the clamping efficiency is higher.
　

Speed Controller

The multi-gear speed regulation design is adopted to conduct precise matching of the cutting and beveling speed according to the pipe materials, wall thickness and processing demands, and the cutting and beveling efficiency and processing quality can be effectively optimized.
　

Connecting Assembly

The connecting assembly is used to connect the motor and the cutting and beveling assembly, ensuring effective torque transmission and stable power output and meeting the high cutting force requirement of pipe cutting and beveling. It is firm, durable and practical.
　

1. Remove the main unit from the packaging box.

2. Insert the locking pins into the holes of the main unit ring body. (Note: Skip this step if splitting the ring is not required.)

3. Measure the pipe size and determine the expansion block specification.

4. Measure the outer diameter of the pipe, tighten the screws, and install the tool holder on the gear ring.

5. Install the main unit on the pipe, adjust the perpendicularity and concentricity between the main unit and the pipe.

Note: During adjustment, ensure that at least one pair of symmetric expansion claws is firmly clamped on the pipe to prevent the machine from falling.

6. Install the tools:
Install the cutting tool on the cutting tool holder, and install the beveling tool on the beveling tool holder. Do not install them wrongly.

Note:
(1) Ensure that the cutting edges of both the cutting tool and beveling tool are in the clockwise rotation direction.
(2) Do not install the tools to extend beyond the tool holders excessively.

7. Install the drive unit at the appropriate position.

8. Connect the 220V single-phase power supply.

9. Start operation: When the tools are working, supply sufficient coolant to cool the tools and timely clean away the iron chips.

10. After work, cut off the power supply, then remove the machine, clean away the iron chips and other debris remaining on the machine, wipe it clean, and apply an appropriate amount of anti-rust oil.

Note: After work, the motor and reducer may be in a high-temperature state. Do not touch them directly with your hands. Wear gloves or wait for the machine to cool naturally before disassembly.

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.