2. Do not open the side door or remove protective covers while the unit is running.

3. If abnormal vibration, noise or odor is detected, stop the unit immediately for inspection.

4. Always disconnect power and confirm the unit has come to a complete stop before cleaning or maintenance.

5. Regularly inspect the power cord and grounding wire; replace them if damaged.

6. Do not disassemble the motor, gearbox or other drive components unless qualified to do so.

7. The machine cannot be operated by minors or untrained personnel.

2. Good integration: Integrating automatic halving and press juicing design, saving manual pre-cut work and greatly boosting the production efficiency.

3. Automatic separation: With mesh-type outlets, automatically separating and discharging pure juice and fruit residues, finished juice with low impurity and fine mouth feel.

4. Safe operation: With a thickened stainless steel machine frame and protective cover, ensuring anti-shake running and operator protection.

5. Wide compatibility: Suitable for juicing of lemons, oranges, citrus, passion fruits and other round berry fruits, achieving multi-scenario commercial application.

Cutting Rollers

The dual cutting rollers drive the stainless steel blades to rotate in opposite direction and halve fruits smoothly without manual positioning, improving the juice yield effectively and reducing the juice impurities. The stainless steel parts are resistant to acidic corrosion and easy to rinse for food sanitation.
　

Squeezing Roller

The wear-resistant soft lining grips fruits stably without peeling or crushing seeds for purer juice. The corrugated stainless roller enhances squeezing friction for higher juice yield. The soft and hard combined structure fits various citrus fruits, and both parts are acid-proof and easy to clean and ensure food hygiene.
　

Copper Core Motor

The 110V 2.2KW copper core motor provides strong starting torque to handle heavy feeding. The large ventilation cover ensures efficient heat dissipation for non-stop long-term running with low noise and stable performance.
　

Control Unit

The control unit has a simple structure, integrates the green start button and red stop button, and is easy to operate and control. The transparent protective cover is designed for preventing juice, water and dust from entering.
　

Residue Outlet

The fruit residue outlet is made of perforated stainless steel and is of an inclined structure, making pomace slide down smoothly without clogging, and ensuring food hygiene, acid resistance and easy cleaning.
　

Juice Outlet

The juice outlet is matched with a fine mesh screen for effectively filtering impurities away from juice and improving the juice purity and taste. The juice chute enables smooth outflow of juice and avoids backflow.
　

A. Pre-Start Checks
1. Verify that the power supply voltage matches the equipment nameplate.
2. Check that all fasteners are secure and drive components move freely.
3. Inspect the feeding hopper, juice outlet and pulp outlet for any obstructions.
4. Confirm that the side access door is closed and locked.
5. Apply appropriate lubricant to the gearbox and drive component lubrication points (for first use or after extended idle periods).

B. Operation Steps
1. Connect the power and press the start button. Allow the unit to run without load for 1-2 minutes to verify normal operation.
2. After confirming no abnormal vibration or noise, begin feeding fruits evenly through the hopper.
3. Maintain a steady and continuous feed rate. Avoid large quantities at once to prevent clogging.
4. During operation, monitor juice and pulp discharge to ensure unobstructed flow.
5. At the end of operation, stop feeding, and then shut off power after all internal materials have been discharged.

C. Shutdown Procedure
1. Stop feeding fruits into the hopper.
2. Wait for all remaining materials inside the unit to be fully discharged.
3. Press the stop button and disconnect power.
4. Perform cleaning and maintenance.

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.