|
|
无标题文档
50W CO2 Laser Engrave Power Supply 110V
For Laser Machine |
This laser power supply is dedicated for CO2 laser device, with high efficiency, high frequency and short response time. The compact and handy power supply has excellent compatibility with laser device and can be directly connected. It can take feedback interface which can be used in closed-loop control and testing the working current of laser. With this power supply, laser device will be easily started up and well operated with higher conversion efficiency and longer expectation of life.
Feature:
Protection switch: test the external water, ventilation, etc., to protect laser device
TTL voltage level control: can be setting high or low lever
Easy control: the start and stop of laser can be easily controlled by TTL level.
New function: timely scene judging which part is damaged, laser tube or laser power.
Good compatibility: it can be applicable to 50W laser tubes from different manufacturers.
High Security: The input and output of power supply are separated completely to avoid getting an electric shock.
Open circuit protection: with well-grounded enclosure, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply.
Specifications:
Output power: 50W
Cooling way: natural air cooling
Relative humidity (RH): ≤90%
Operating temperature: -10~40℃
Input voltage: AC110V
Maximum output voltage: DC 25KV
Maximum output current: DC 15-20mA
Efficiency: ≥90% (full load)
Response speed: ≤1ms (from the switch Signal is given to the output current up to 90% of the setting current) |
 |
|
