This brand new CO2 laser engraver is suitable for various materials, such as mylar stencil material,bamboo piece, double-color planks,rubber plate,boulder, horns, leather, crystal, wood, organic plastic, abrics, paper ,film, canvas, rubber stamp material, Acrylic and Plastics.
The Laser Engraving and Cutting Machine is equipped with one 80W co2 laser tube, high precise stepping motors, Control board, 20mm Reflection Mirror(130027) ,18MM 50 Focus Len(130017),80W Laser Power Supply ,80W Laser Tube ...
This machine employs an USB port and thus can be connected to your laptop or desktop.
The standard software of this machine is laserworks, laserwork can be used alone or in combination with CorelDRAW and AutoCAD.The software supports importing a variety of graphic formats, including AI/DXF/PLT/GIF/BMP/JPEG/PNG/TIFF/PGX/WMF... Laserworks only supports Windows system.
The machine includes water pump, air pump, smoke exhaust pipe(size:OD-150mm,Unfold length-about 2m), USB cable, power cable, software(laserwork), instructions.
This machine comes with electric rise-down platform and 128M function of storage with offline working. Technical assistance:Any problems, welcome to contact us. We will reply to you in 1-2 business days.
-We have different types of laser engraver machine (40W, 50W, 60W and 100W). And offer all accessories and some materials (acrylic, double color sheet) for laser machine.
--We offer one year warranty for laser engraving machines except laser tube.(laser tube, it is very fragile, we only support local pick up).
-And provide technical support for this laser machine on the Internet and telephone..
Laser power: 80W
Working area:35.43"x23.62" (90*60cm)
Laser type: co2 wave 1064um
Engraving speed: 0-30000mm/min
Cutting speed:0-2600mm/min
weight:230.5lb(180kg) DPI:1000
Machine size (not including legs):51.97"*35.43"*25.2"(1320*900*640mm)
Lifting range: 0-300mm
Support software: LaserWork
Interface standard: USB 2.0
Laser cooling:water cooling
Minimum shaping character :1mm
External dimensions:55.2"*38.58"*33.1"(140*98*84cm)
If the machine has the following failures:Up and down movement of the Y axis is reversed,And accompanied by noise. 1-There was a loose wire on controller.2-there was a loose wire on Y-axis motor
If the machine does not recognize the USB storage device.
1-Reinstall USB driver and software driver(Keep the machine open and connect to the computer)
2-Install the motherboard upgrade program.(RDC5121-V13.01.09),Installation method:
-
Main feature
Adopt high q uality mainboard, chip and stepping belt which can control the engraving more precise
Cooling system with coolen circular water. Air pump: blow away the waste and coolen proceed material surface
The reinforced and thickened machine body make transportation safer . Current regulation: using this button to adjust the electric current output. Current Indication: mA : refers to actual output electric currnet of the engraver. Water-cooling pipe port : It is for the circulation of cooling water . To lengthen the service life of the laser tube , purified water is to promoted .
There are Service and Technical Support for all our products.
Pre-installed 80W laser tube
Application
This machine is suitable to seal engraving, advertisement, art gift, garment, leather, toy, building upholster, computerized embroidery, packing and printing, paper product, garments sampling, large width tailoring, shoemaking, furniture, industry, craftwork, nameplates decorations, woodcut and other industries.
Acrylic Sheet Engraving
Acrylic is the most popular material to engrave using a laser system. It engraves and cuts very easily, comes in a wide variety of shapes and sizes, and can be relatively inexpensive. Acrylic comes in two forms, cast and extruded.
Cast acrylic is used for almost all engraving purposes. This is because the frost produced provides a nice white contrast against the clear material.
Extruded acrylic remains clear when engraved but does not produce an adequate contrast.
However, extruded acrylic is ideal if you are going to vector cut only. Extruded acrylic is less expensive than cast and also has a lower melting point. The lower melting point produces an edge that looks flame finished when cut.
size: 600x300x3(mm)
Double-color Plate Engraving
Double-color plastic sheet is a kind of materials for engraving, which is widely applied to production of signboard, lighting advertising board, gift arts, information board, interior decoration and so on. contact us by info at our website.
The main processing way for double-color plastic sheet cover cutting, sawing, carving, gilding, laser-treating, bending and bonding. size: 600x300x3(mm)
Wood Laser Engraving
Wood engraving has been used widely in our life.
It is very easy using the laser to produce sophisticated inlay work on wood, mother-of-pearl or even plastic. Veneers may be cut to size with special accuracy using the laser.
The great advantage lies in the precision of the cut parts and also the controllability of the CAD or graphics programs.
Positive and negative parts may be cut in very thin materials without correcting the cutting width.
tags Engraving
Glass Engraving
Mylar Airbrush Stencil Material Engraving
It's a kind of substrates to be cut by cutting plotter to form all kinds of figures and graph. The stencils are reusable, it can be used for T-shirt, wall, artwork, human body, and automotive applications. It is made of Mylar.
Thickness Size:
0.125mm
0.188mm
0.25mm
(The thickness of materials we provide in the package is 0.125mm ,please contact us if you need other. )
Rubber Plate Engraving
This rubber plate is made of two layers ofnatural rubber, can be cut by laser engraver to make stamp for commercial andpersonal use, especial for printing factory to print cartons and other packageboxes. Pay attention: Please set up mirror image when carving patterns.
Non-woven Fabric Engraving
Non-woven fabric is a fabric-like material made from long fibers, bonded together by chemical, mechanical, heat or solvent treatment. The term is used in the textile manufacturing industry to denote fabrics, such as felt, which are neither woven nor knitted. Nonwoven materials typically lack strength unless densified or reinforced by a backing. In recent years, nonwovens have become an alternative to polyurethane foam.
Red Rubber Stamp Material Engraving
Rubber stamping is quite simply the process of transferring and replicating an image.
Using a variety of inks and other mediums, the image on the stamp can be transferred onto a huge range of objects, transforming the ordinary into something special.
Rubber stamps have been used widely now,our laser engraving machine can make a wonderful rubber stamp,which maybe start your new business.
size about:35x4.5x4 Pay attention: Please set up mirror image when carving patterns.
Rubber Sheet for Laser Engraver Engraving
This rubber plate with A4 size 2.3mm thicknes natural rubber, can be cut by laser engraver to make stamp for commercial and personal use. Main features:
Smooth surface for quality results,easy cutting and engraving
Suitable for finer sized prints, having a fine ink loading, precise printing
Chemical, oil, abrasion resistance Thickness:0.09"/2.3mm Size: 11.6"x8.26"x0.09"/297x210x2.3mm
Self-Inking Rubber Stamp Holder and Inkpad
Self-Inking Rubber Stamp works greatly and simply.We custom date, address, images and so on for you.Self Inking rubber stamp is for use in regular paper not for glossy papers.Use laser engraving machine,you can DIY all kinds of self ink rubber stamp.
Features:
1.Sturdy and durable,saving cost
2.Mark clearly,improve image
3.Convenient fuel injection,easy to carry
4.Panoramic window,precision positioning,increase efficiency
5.Custom date,address and all kinds of images to meet your needs Printing Area: 40*15mm
130026: Laser Machine Rotary Attachment 
130114: Industrial Water Chiller CW300 
130058: Industrial Water Chiller CW5000
Plastics & Rubber 
