|
16 tons pneumatic
manual operation integrated portable pipe bender |
|
|
|
|
|
|
 |
 |
 |
|
Product Introduction |
This pipe bender is designed to bend water pipe, rigid
conduit, heavy-gauge galvanized
pipeused in commercial applications, and other similar types of pipe.
When bending thin-
walledpipe or conduit, fill the pipe with sand and cap the ends before
bending.
Equipped with pneumatic hydraulic pump, directly connected to the air
compressor to use,
can also rely on the handle manual operation. |
 |
 |
|
Product parameter |
|
Capacity |
16T |
|
Control Mode |
Pneumatic+Manual |
|
Cylinder Stroke |
250mm |
|
Material |
Nodular cast iron |
| Die |
1/2"，3/4"，1"，1-1/4”，1-1/2" ，2" ，2-1/2" ，3" |
| Net
Weight |
120lb(54.5kg) |
| Gross
weight |
152lb(69kg) |
|
Package size |
29.3*25.8*11.8in
(74.5*65.5*30cm) |
|
 |
|
The outer diameter of the mold
corresponds to the size and wall thickness |
| Die
specification |
Die outside
diameter |
Nominal
diameter |
Minimum wall
thickness |
|
1/2" |
φ22 |
DN15 |
2.5mm |
|
3/4" |
φ28 |
DN20 |
2.5mm |
|
1" |
φ34 |
DN25 |
3mm |
|
1-1/4” |
φ42 |
DN32 |
3mm |
|
1-1/2" |
φ48 |
DN40 |
3.5mm |
|
2" |
φ60 |
DN50 |
3.5mm |
|
2-1/2" |
φ75.5 |
DN65 |
3.75mm |
|
3" |
φ89 |
DN80 |
4mm |
|
If there is no corresponding mold, you can choose a
slightly larger mold size (such as 32MM optional 34MM).
You can check whether the wall thickness is suitable according to the
corresponding mold size (the wall thickness
can be 0.5 or 0.5). |
|
Detail |
 |
 |
|
Pneumatic and manual hydraulic operation
mode,
equipped with pneumatic hydraulic pump, directly
connected to the air compressor to use, can also
rely on the handle manual operation. |
A
total of eight holes can be used to install rollers.
Change the hole positions and adjust the bending
angle as required. |
|
|
|
The handle has a groove, and when the work
is
completed and the hydraulic cylinder returns to
the position, the pressure can be relieved by
rotating the pressure relief valve at the bottom of
the hydraulic cylinder with the handle. |
Mold installation column, easy to load and
unload. |
|
|
|
|
Item Number: 16 tons pneumatic manual
operation integrated portable pipe bender 148048 |
|
|
You can make
order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us
with low cost. |
