|
NOTE:
1.The liquid viscosity of the reaction is more than 10000 viscosity, and the deceleration motor is recommended. The machine comes with a non-deceleration motor.
2. This equipment
is a fragile product, please handle it carefully when using it.
3. When using vacuum grease on
rotatable parts such as glass cock or feeding tube, please choose a
smooth and viscous brand.
4.
Please apply the soft vacuum grease evenly and thinly on the valve
core, so that the grinding port is fully matched.
5.
After long-term use, the grinded parts where vacuum grease has been
applied will oxidize or harden the grease, which may cause
difficulty in rotation or stickiness of the grinded parts.
Therefore, before the grease hardens, please regularly remove the
parts and wipe off the grease on them with a paper towel, and then
use toluene and xylene and other solvents to carefully wipe clean.
After the solvent has completely evaporated, re-apply new vacuum
grease.
6. If the grinding mouth has been tightened or stuck, forcibly
disassembling at this time will cause the glass to break, which is
very dangerous. When sticking occurs at the grinding mouth, please
use heating (hot water, blowtorch) to soften the cured vacuum grease
before disassembly.
|
