|
|
新建网页 1
新建网页 1
|
90EL Steel Dent Pulling Machine 110V |
|
The
machine is the ideal product for dent pulling and straightening of low
thickness car body elements, such as bonnet, door, roof panel and wings.
This welding machine has many advantages such assimple operation, short
welding time, little heat impact on the base material, no damage to the
basematerial surface, good welding quality, firmness, beautiful
appearance, and energy saving. lt is the most ideal equipment especially
in the maintenance of steel car bodies. |
|
 |
| Product
parameter:: |
Input Voltage: 110V
Power: 3KW
Welding Thickness: 0.4 to 1.2mm
Instantaneous Maximum Current:6800A
Current: 77 Gears Operation
|
 |
| Product analysis:: |
 |
|
Panel Operation: |
1.Connect the product to a suitable power
source, and then press the switch todisplay: function (left) power
(right).
2.To adjust the power intensity (current size), press the + or - button.
3.To change the function, press the function selection key.At this time,
you can usethe + and - buttons to select the function number.
4.Manual welding and intelligent welding:
---When using manual control, connect the torch switch connector and
switch theswitch to manual mode.
---When using smart mode, there is no need to disconnect the torch
switchconnector and switch the switch to smart mode.
|
Welding Operation: |
| The machine can be welded
manually/automatically, and the host automatically detects the
short-circuit condition of the welding gun, and a welding spot
is generated within 1 second. Disconnect the welding gun and the
welding part for 0.5 seconds, then the next point can be welded,
and others can be welded in sequence. When switches to manual
mode, use the gun switch to control welding. |
|
| Features: |
|
1. Using flexible voltage technology, it can still be welded firmly when
the voltage is low to 155V.
2. The welding joints are extremely small,the consumables loss is small,
no damage to the anti-rust paint behind the sheet metal, less damage to
the original bodywork and stronger welding.
3.Car dent puller has auto welding and manual welding two modes can be
switched at any time, easy to operate.
4. High strength thickened case with thickness up to 1.8mm. |
|
 |
|
Item Number:: |
|
1* 90EL Steel Dent
Pulling Machine 110V (033249) |
| |
|
You can make order
with no worry.
Any concerns just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost. |
|
