|
|
新建网页 1
|
Spindle Motor 220V
7.5KW(Flanged) |
| Spindle motor has the advantages of
fast speed, small volume, lightweight, low material consumption,
low noise, low vibration.It is widely used in wood, aluminum,
metal, stone, metal, plastic and other materials carving
processing, widely used in many industries, can greatly improve
the processing quality and accuracy. |
| Voltage: |
220V |
| Power: |
7.5KW(10HP) |
| Current: |
30.09A |
| Operating Frequency: |
300Hz |
| Collet Nut: |
ER32 |
| Clamping Range: |
0.118"-0.787"(3mm-20mm)[Standard with 6mm collet, if you need
other sizes please contact us] |
| Clamping Diameter of
Collet: |
0.236"(6mm) |
| Motor Speed: |
18000rpm |
| Cone Hole Beat: |
2UM |
| Cooling Mode: |
Fan Cooling |
| Lubrication Mode: |
Grease Lubrication |
| Fuselage Material: |
Pure Aluminium |
| Packing size: |
20.1"*9.1"*8.7"(51cm*23cm*22cm) |
| Net weight/Gross weight: |
37.5LB(17kg)/39.0LB(17.7kg) |
|
NOTE: Spindle motor
must be equipped with frequency converter.Set up frequency
converter correctly according to machine requirement. The item
is not included frequency converter. |
| Product Number |
Voltage |
Power |
Nut Type |
Clamping Range |
| 053290 |
220V |
2.2kw |
ER25 |
1mm-16mm |
| 053289 |
220V |
3.5kw |
ER20 |
1mm-13mm |
| 053288 |
220V |
4.5kw |
ER32 |
3mm-20mm |
| 053149 |
220V |
6.0kw |
ER32 |
3mm-20mm |
| 056291 |
220V |
7.5kw |
ER32 |
3mm-20mm |
| Product Features & Advantages |
- Through the inverter to adjust the
output voltage and frequency can be achieved 0-18000 stepless.
- High precision bearing and pure copper coil, high machining
accuracy, long service life.
- Pure aluminum body, anti-oxidation and anti-corrosion, lighter
weight.
- Adopt precision steel ball holder to ensure spindle rotation
accuracy in high speed grinding.
- Lubricating grease resistant to high temperature of 200℃, low
noise. |
- must match the drive spindle chosen
correctly according to the electric spindle nameplate good
debugging power, voltage and frequency.
- Set the frequency converter should be set command channel, and
then set the display channel, and finally set the parameters.
When setting parameters, be sure that the reference frequency,
the frequency of the three highest rated frequency and
consistency.
- The spindle is generally clockwise in the wrong direction, the
drive can change settings or swap any two rotating wire the
inverter output UVW terminal on.
- In general, water-cooled spindle surface temperature and
ambient temperature greater than 20 degrees, the heat can be
considered a spindle; when air-cooled spindle surface
temperature greater than ambient temperature of 30 degrees, can
be identified as the main heat seriously, immediately shut down
cooling, a check. |
| Product Presentation & Details |
| Spindle Motor *1 |
Fork Wrench *1 |
Collet Wrench *1 |
|
You can
make order with no worries.
Any concerns just feel free to let us know, we'll reply in 24
hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days
after payments cleared. Orders are processed from Monday-Friday;
Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the
consumables.
We stand behind our products all the item, so even if your
warranty period has expired, you can still seek for service or
technical support from us with low cost. |
|
