|
|
Product Overview
|
110V-240V 11LB
Commercial Intelligent Electric Paste Honey Filling Machine Weighing
Type/Automatic Type Gear Honey Pump |
| The weighing intelligent filling
machine can be used for filling viscous food liquids such as
honey, sesame paste, tomato sauce, fruit jam without hard
particles, oyster sauce, and so on. The weighing intelligent
filling machine uses food-grade gear pumps and can be used for
transporting food liquids. It is safe. Intelligent operation,
capable of automatic filling and weighing-based filling, is
convenient and intelligent to use. It is made of high-quality
materials, which are sturdy and unlikely to deform, and have a
longer service life. |
| Voltage:
|
110 - 240V (Internal
voltage 12V) |
| Power: |
240W |
| Filling
accuracy: |
±2g (or 1/1500) |
| Operating
temperature: |
64.4-140℉ (18-60℃) |
| Filling
range: |
0.11-11LB (50-5000g) |
| Shell
material: |
Stainless steel |
| Scope of
application: |
Thick food liquids,
viscosity ranging from 1000 to 4000 (such as honey, sesame
paste, tomato sauce, oyster sauce, fruit jams without hard
particles, etc.) |
| Package size: |
17"*13.7"*14"
(43cm*35cm*36cm) |
| Net weight/Gross weight: |
21.6LB(9.8kg) /
23.8LB(10.8kg) |
|
Note: The flow rate of the
pump is usually calculated based on the flow velocity in the
open state. However, due to the different types of liquids being
pumped, there may be some deviations. |
| Product Features & Advantages |
 |
 |
 |
|
Intelligent Control
With the integrated control of the intelligent system, functions
such as weight setting, peeling, filling, and automatic filling
can be achieved. The operation is simple and the use is
convenient. |
Pump Head
The pump head adopts non-stick plastic, acid and alkali
resistance, swelling resistance, suitable for all kinds of
viscous liquids.
|
Height
Adjust
The filling height can be adjusted at any time according to the
height of the bottle; The bracket slides smoothly, fits tightly,
and locks securely; The 304 hand twisted clamp is acid and
alkali resistant, smoothly twisted, and has excellent sealing. |
 |
 |
 |
|
Stainless Steel Body
Made of high-quality stainless steel material, sturdy and not
easily deformed; Convenient and hygienic, easy to maintain. |
Heat Dissipation
On one side of the machine, there are heat dissipation holes
which can promptly lower the internal temperature of the machine
and extend its service life. |
Speed Adjustment
There is a speed adjustment button on the right side of the
body, which can be adjusted at any time according to needs and
is easy to use. |
|
- Foot
pedal switch: The filling process can be carried out using a
foot pedal switch, which makes the operation more convenient.
-
Motor: Utilizes standard reduction motor, with aluminum casing
and copper wire, ensuring long-lasting durability.
- High Precision: Ensures accuracy with intelligent error
correction, controlling errors to less than
±2g.
Features error alarm functionality, allowing setting of
deviation thresholds for automatic alarm when exceeded.
- Delayed Start: Can be configured for delayed filling from 0.1
to 9999 seconds based on actual conditions.
- Material Retraction: Equipped with silicone retraction nozzle
for drip-free, hygienic operation. Material automatically
retracts after filling to prevent waste.
- Bottle Weight Correction: Automatically adjusts bottle weight
in auto mode, resetting to zero. Filling begins only after
container detection (Note: The container must be larger
than 10g). |
| Product Usage Instructions
& Precautions |
|
Usage Instructions
Time Control Method:
1. Please tighten the connecting tube, place the end with the
filter into the liquid, and turn on the power. Prepare a
container, set the knob to 100%, press "300" and "OK" on the
keypad - the filling value will display 300. Then press "FILL"
to fill the pipeline with liquid. If unsuccessful on the first
attempt, please repeat the operation.
2. Calibrate Filling Standard: Place a larger container, press
"1688" and "FILL," then input the actual value (e.g., 418
grams/milliliters) and confirm by pressing "418" and "OK".
3. Formal Filling: Place the container, input the filling value
(e.g., 999 grams), press "999" and "OK," then press "FILL" to
start filling.
4. Filling Error Fine-Tuning: If the measured error exceeds ±2,
press "+" or "-" to adjust. The program will automatically save
the correction value.
5. Modify Filling Value: Directly input new numbers and press
"OK." No recalibration is needed.
6. Automatic Filling: Default interval is 10 seconds. To change
to 5 seconds, please press "5," "AUTO," then "AUTO" again. After
the continuous filling light turns on, press "FILL" to start.
The program will auto-countdown; press "CLEAR" to stop.
Weighing Control Method:
1. Please tighten the connecting pipeline and immerse the end
with the filter into the liquid. Prepare a container, turn on
the power, and wait for the self-check to complete (displaying
three zeros). On the keypad, please press "300" and "OK" - the
filling value will display 300. Press "FILL" to purge air from
the pipeline and fill it with liquid. Repeat if necessary. For
this gear pump, priming is required before liquid extraction:
add a small amount of liquid to the pump’s large port using a
squeeze bottle. Press "1234" and "FILL" for forward extraction;
press "5678" and "FILL" for reverse retraction. Press "CLEAR" to
stop the pump in any state.
2. Liquid Filling Test: Due to varying liquid densities,
conduct a test upon startup. Place a larger container, press
"1688" and "FILL" to initiate a test fill (approximately 120
grams). After completion, press "FILL" again to top up to the
set weight.
3. Formal Filling: Place the container, input the target weight
(e.g., 999g) by pressing "999" and "OK," then press "FILL" to
start. Each press fills one portion.
4. To modify the filling value, directly input new numbers and
press "OK." No retesting is needed.
5. During the filling process, if the operation stops without
reaching the target weight, please check the speed adjustment
knob. If significant errors are observed, please adjust the knob
to the 30-40% position.
6. The "FILL" button on the keypad, the dedicated filling
button, and the foot pedal switch function identically. If
auto-start fails or speed is inconsistent, contact support to
adjust system parameters. |
|
Precautions
1. To prevent electric shock and electromagnetic interference,
please ensure the power supply is equipped with leakage
protection and the chassis is properly grounded!
2. If the pump needs to be stopped/emergency stopped during
filling, press the CLEAR button or turn off the power switch.
After an emergency stop, please restart and perform a test
before resuming operation!
3. The gravimetric filling machine uses a C3-grade load cell.
Overloading is strictly prohibited, as it may cause permanent
deformation of the sensor! Please avoid fan, air conditioning,
or any airflow interference during filling.
4. Please keep the machine away from other high-power equipment
to prevent electromagnetic interference.
5. This product features a food-grade gear pump, suitable for
food filling but NOT for corrosive materials such as acids or
alkalis. It is not designed for flammable or explosive
substances - customers handling such materials should choose
alternative products.
6.
It must be cleaned and tested before the
first use. During the test, pay attention to the water capacity
of the container and familiarize yourself with it before
starting to use it.
7. When filling food-grade products, they
should be washed and sterilized with hot water at a temperature
of over 60℃ before and after use.
8. Due to production requirements for
testing, there will be a small amount of liquid remaining in the
pumps and pipes. |
| Product Presentation & Details |
| Commercial Intelligent
Electric Paste Honey Filling Machine *1 |
Accessory package *1 |
|
You can
make order with no worry.
Any concern just feel free to let us know, we'll reply in 24
hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days
after payments cleared. Orders are processed from Monday-Friday;
Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the
consumables.
We stand behind our products all the item, so even if your
warranty period has expired, you can still seek for service or
technical support from us with low cost. |
|
