|
|
Product Overview
|
110V
MP-3000E+ Variable Frequency Vibration Test Bench (1-400Hz
Adjustable Frequency) 1.5KW
|
MP-3000E+ intelligent vibration testing
machine is used to simulate the various environments encountered
in the manufacturing, assembly, transportation and use of the
execution stage, to identify whether the product is able to
withstand environmental vibration, suitable for the research,
development, quality control and manufacturing of electronics,
mechanical and electrical, optoelectronics, motor vehicles, toys
and other industries.
The test method of the machine is based on the digital control
of random vibration, and the vibration of various environments
is simulated and provided to determine the ability of the test
sample to withstand the specified broadband random vibration.
The split type design can greatly reduce the failure rate of the
control circuit. |
| Model: |
MP-3000E+ |
| Voltage: |
110V |
| Power: |
1.5kW |
| Rated test
load weight: |
132lbs(60kg) |
| Vibration
frequency range: |
1~400hz
(Fixed frequency or sweep frequency can be set arbitrarily) |
|
No-load maximum displacement
(amplitude):
|
P～P/5mm |
| Working
surface size: |
19.7"*19.7"(50cm*50cm) |
|
Vibration direction:
|
Vertical, left and right, (Y / X)
|
|
Operating conditions:
|
0～40℃, RH<80%
|
| Net
weight/Gross weight: |
352.3lbs(159.8kg) /
391.8lbs(177.7kg) |
|
Different vibration parameters can be
set in 20 segments, the maximum test time of each period is
999 minutes (i. e. 16 hours), and the number of cycles of
0～200 times can be set arbitrarily.
|
| Product Features & Advantages |
|
 |
Automatic setting, simple operation,
the use of advanced microcomputer control circuit, you can
permanently memory set parameters, power will not lose data.
At the same time, the number of vibration program segments
and the number of program cycles can be set. When the
machine completes the vibration test stop or the machine is
shut down and powered off, the machine will automatically
remember the current vibration data and automatically reset.
|
Built-in overload protection fuse, and
equipped with high-performance chip, read data more
accurately. The microcomputer protection circuit is adopted
to overcome the defect that the ordinary machine is burned
by the impulse voltage when starting up, and the use is more
convenient and reliable.
|
 |
Both test bench and the control cabinet
have heat dissipation holes, timely heat dissipation,
discharge the excess heat inside the machine, to ensure the
long-term stable operation of the machine.
|
● Rubber support
legs at the bottom, which are non-slip, wear-resistant, good
silence, can ensure the stability of the machine, and can
prevent water from entering the machine from the bottom.
● There are handles on both sides to
facilitate the handling and moving of the machine, and the
machine can be moved to the place where it needs to work at
any time, saving worry and effort and making it safer.
|
 |
Operation
Procedure
※ Place the tested product in the
center of the operating table and fix it reliably on the table,
otherwise the vibration force is unbalanced, and will affect the
test effect!
※ Before starting, the amplitude knob must be adjusted
counterclockwise to the minimum (Min). After starting, the
amplitude knob should be adjusted to the required range
according to the test requirements of the tested product. No
load should not be greater than ± 2.5mm. Otherwise,
the machine performance and the noise will increase accordingly.
※ After setting the test parameters, long press the [start]
key for about 2 seconds to start.
※ Press the test number key for 5 seconds to clear the test
number.
※ If the vibration needs to be suspended during the vibration
operation, press the [pause] key to pause, and press
again to resume the vibration.
※ In stop state: press the [Start] to start vibration;
press the [stop] to stop vibration.
※ Turn on the timing function, the test will automatically stop
when it reaches the preset time, and the interface will display
"test complete" and sound prompt. Press the [Confirm] key
or automatically close the prompt sound after 5 seconds and
return to the initial operation setting interface.
Note: Due to
the weight of the device, it is recommended to keep the original
packing case for easy handling. |
 |
|
| Product Presentation & Details |
| MP-3000E+ Intelligent
Vibration Testing Machine *1 |
Accessory Package *1 |
|
You can
make order with no worry.
Any concern just feel free to let us know, we'll reply in 24
hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days
after payments cleared. Orders are processed from Monday-Friday;
Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the
consumables.
We stand behind our products all the item, so even if your
warranty period has expired, you can still seek for service or
technical support from us with low cost. |
|
