|
|
Product Overview
110V 1~200Hz
Electromagnetic Vibration Table Variable
Frequency Vibration Tester Vertical / (Y/X/Z)
1.5KW
 |
The intelligent vibration testing
machine is used to simulate the various environments encountered
in the manufacturing, assembly, transportation and use of the
execution stage, to identify whether the product is able to
withstand environmental vibration, suitable for the research,
development, quality control and manufacturing of electronics,
mechanical and electrical, optoelectronics, motor vehicles, toys
and other industries.
The test method of the machine is based on the digital control
of random vibration, and the vibration of various environments
is simulated and provided to determine the ability of the test
sample to withstand the specified broadband random vibration.
The split type design can greatly reduce the failure rate of the
control circuit. |
| Voltage: |
AC110V |
| Power: |
1.5kW |
| Rated test
load weight: |
132lbs(60kg) |
| Working
table size: |
19.7"*19.7"(50cm*50cm)
|
| Vibration
frequency range: |
1~200Hz
(Fixed frequency or sweep frequency can be set arbitrarily) |
| No-load
vibration amplitude: |
0 ≤ 5mm PP
(Note: The vibration amplitude varies depending on frequency
and weight. The amplitude under no load must not exceed ±2.5
mm.)
|
| Vibration
direction: |
Vertical / (Y/X/Z) |
| Operating
environment: |
0~40 ℃; RH＜80% |
| Net weight/Gross weight: |
502.6lbs(228kg)/619.5lbs(281kg) |
|
Note: It can be set with 20
different vibration parameters. The testing time for each
segment can be set arbitrarily, up to 999 minutes (i.e., 16
hours), and the number of cycles can range from 0 to 200 times
(standard model). |
| Product Features & Advantages |
 |
 |
 |
|
Power off Automatic Memory
Automatic setting, simple operation, the use of advanced
microcomputer control circuit, you can permanently memory set
parameters, power will not lose data. At the same time, the
number of vibration program segments and the number of program
cycles can be set. When the machine completes the vibration test
stop or the machine is shut down and powered off, the machine
will automatically remember the current vibration data and
automatically reset. |
Intelligent Control
Built-in overload protection fuse, and equipped with
high-performance chip, read data more accurately. The
microcomputer protection circuit is adopted to overcome the
defect that the ordinary machine is burned by the impulse
voltage when starting up, and the use is more convenient and
reliable. |
Safe and Reliable
The hooks can be firmly hung on the vibration test machine,
while the strap has enough elasticity and strength to tightly
tie the object under test to ensure that no loosening or
displacement occurs during the vibration test. |
 |
 |
 |
|
Precise Control
Frequency and amplitude are adjusted
independently, without affecting each other). The amplitude
changes with the change of frequency and load weight, the higher
the frequency, the amplitude decreases and the acceleration
increases accordingly. |
Easy to Move
There are handles on both sides of the machine for easy lifting
and handling, and it can be easily moved to the place where it
is needed, saving time and effort. |
Smooth Operation
Both test bench and the control cabinet have heat
dissipation holes, timely heat dissipation, discharge the excess
heat inside the machine, to ensure the long-term stable
operation of the machine. |
| Product Presentation & Details |
 |
Operation
Procedure
※ Place the tested product in the
center of the operating table and fix it reliably on the table,
otherwise the vibration force is unbalanced, and will affect the
test effect!
※ Before starting, the amplitude knob must be adjusted
counterclockwise to the minimum (Min). After starting, the
amplitude knob should be adjusted to the required range
according to the test requirements of the tested product. No
load should not be greater than ± 2.5mm. Otherwise,
the machine performance and the noise will increase accordingly.
※ After setting the test parameters, long press the [start]
key for about 2 seconds to start.
※ Press the test number key for 5 seconds to clear the test
number.
※ If the vibration needs to be suspended during the vibration
operation, press the [pause] key to pause, and press
again to resume the vibration.
※ In stop state: press the [Start] to start vibration;
press the [stop] to stop vibration.
※ Turn on the timing function, the test will automatically stop
when it reaches the preset time, and the interface will display
"test complete" and sound prompt. Press the [Confirm] key
or automatically close the prompt sound after 5 seconds and
return to the initial operation setting interface.
Note: Due to
the weight of the device, it is recommended to keep the original
packing case for easy handling. |
| Product Presentation & Details |
|
Variable Frequency Vibration Tester *1 |
English Manual *1 |
|
Rubber Rope *2 |
Signal Cable *3 |
|
You can
make order with no worry.
Any concern just feel free to let us know, we'll reply in 24
hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days
after payments cleared. Orders are processed from Monday-Friday;
Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the
consumables.
We stand behind our products all the item, so even if your
warranty period has expired, you can still seek for service or
technical support from us with low cost. |
|
