Machinary & Tools > Vibrating & Shaker>
057212:Box Vibratory Feeding Electrostatic Powder Coating Machine 110V
Unit:
 set
Price:
 C $2,479.00
Weight:
 62.00kg
QTY:
Out Of Stock
     

Similar products

230197:110V Full Stainless Steel Linear Vibrating Screen(JG30-75,9mm)

230196:110V Full Stainless Steel Linear Vibrating Screen(5mm)

230118:#20 Stainless Steel Screen

230119:#80 Stainless Steel Screen

230162:#50 Stainless Steel Screen

Box Vibratory Feeding Electrostatic Powder Coating Machine 110V
Product Overview
The electrostatic powder coating machine is a professional device for coating parts and products with plastic powder and metallic powder efficiently and flexibly. It combines the advantages of the electrostatic coating technology and powder coating and has the features of high powder utilization rate, high energy efficiency, good coating effect, high adaptability and long service life. The electrostatic powder coating machine can be widely applied to the metal manufacturing industry, the material processing industry, the machinery repair and maintenance industry and so on.
Product Parameters
Electrical Parameters
Nominal input voltage 110 VAC
Connected load (without vibrator) 140 VA
Nominal output voltage (to the gun) eff.10 V
Nominal output current (to the gun) max. 1.2 A
Connection and output for vibrator (on Aux output) 110 VAC  max. 100 W
Connection for rinsing function (valve) 24 VDC  max. 3 W
Temperature range 0 °C ~ +40 °C (+32 °F ~ +104 °F)
Max. surface temperature 120 °C (+248 °F)
Pneumatic Parameters
Max. input pressure 10 bar
Min. input pressure 6 bar
Input pressure (Dynamically based on pressure regulator setting) 5.5 bar / 80 psi
Max. water vapor content of the compressed air 1.3 g/m³
Max. oil vapor content of the compressed air 0.1 mg/m³
Max. compressed air consumption 8 Nm³/h
Overall Parameters
Application powder Plastic powder, metallic powder
Product size 47*97*107 cm (18.5*38.2*42.1 inches)
Net weight 38kg (83.8 LBS)
Attention

1. The manual coating equipment can only be used with the specified gun types!

2. The total air consumption for the device is determined on the basis of the 3 configured air values. These values use the internal control pressure of 5.5 bar!

3. The machine is suitable for plastic powder and metallic powder, and is not suitable for enamel powder.

4. The manual equipment may only be operated in conjunction with a sufficiently powerful suction unit, otherwise the stirred-up dust from the coating powder can cause respiratory issues or a slippage/falling hazard.   

5. If a container is placed on the vibrating plate, it is strictly prohibited to put fingers into the gap between the two plates to avoid pinching risks.
Product Features

1. Advanced Technology: The powder coating machine adopts the advanced coating technology and can quickly and uniformly spray the surfaces of objects, effectively improving the production efficiency. Meanwhile, the coating machine can reduce the energy consumption in the spray coating process.

2. Precision Control: The machine can achieve precise coating operation, ensuring the stable spraying quality. The coating machine can also be adjusted according to different spraying needs, and is suitable for various spraying processes.

3. Wide Application: The coating machine can coat objects of various materials, such as metal and wood, and has a wide range of application. The coating machine can also achieve spray coating of different colors and effects, meeting the needs of different customers.

4. Human-Machine Interface Operation: The operation is easy and convenient, and non-professionals can operate the machine effortlessly. The coating machine also has an automatic control function and can achieve automatic coating, improving the working efficiency.

5. Convenient Maintenance: The coating machine is relatively easy to maintain and only needs to be cleaned and lubricated regularly. The coating machine also has a fault self-diagnosis function, the faults can be found and solved timely, and the shutdown time is greatly shortened.
　
　
The control unit is equipped with a liquid crystal display screen, different parameters can be clearly displayed and freely adjusted during use, and operation is simple and efficient. 　 Different connectors are provided for different parts to achieve different coating effects, connection is firm and reliable, and the control effect is excellent.
　
The powder gun is specifically designed for efficient powder coating and can be hung on the holder safely and easily, the gun cable can also be wound and stored orderly, and the environmental cleanliness is well kept. 　 The powerful injector achieves effective suction of powder, the suction tube is firm and durable and is not prone to deformation, and the fluidizing ring at the bottom greatly promotes the fluidization of powder.
　
The vibrating table is driven by the internal vibrator to vibrate the powder in the container, greatly assists in fluidization of powder and facilitates powder conveying in the using process. 　 The filtering unit has the functions of efficient filtering and pressure adjustment, the powder can be smoothly filtered, and the pressure can be clearly displayed and freely adjusted as required.
Operation Method

1. Turn on the gun control unit with the ON key. The display is turned on and the control unit is ready for operation.

2. Swivel aside the fluidizing/suction unit.

3. Place the open powder container on the vibrating table.

4. Place the fluidizing/suction unit onto the powder.

5. Set coating parameters.

6. Press the application button for the appropriate preset mode.

7. Press the

program key, select the desired program (01-20) and change the coating parameters as required.

8. Set the total air volume.

Notes: A total air volume of 4 Nm³/h and a 50% powder share are recommended as the base values.

9. Adjust the powder output volume (e.g. according to the desired coating thickness).

10. Set the electrode rinsing air.

11. Set the fluidization.

12. Point the gun into the booth (not at the object to be coated), press the gun trigger and visually check the powder output.

13. Check whether everything is functioning correctly.

14. Conduct the coating operation.

15. Adjust the coating parameters as necessary.

16. Activate the rinsing function periodically.
Product Display
Item Number (057212): 1 x Electrostatic Powder Coating Machine 110V

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
无标题文档

About Us Product Service Shipping Payment Privacy refund Warranty

Copyright ASC365.com All Rights Reserved