1. Make sure that the power supply and the voltage at the work place are normal and can be matched with the machine, and the earth wire is connected reliably.

2. Confirm the source of water supply and ensure that the water quality is good. Do not add additive into the water to avoid pipe blockage.

3. Test the performance of the leakage switch before use to ensure that it is normal and reliable.

4. The user should wear gloves during operation. The gun mouth should not point at human body. Do not touch the steam pipe to avoid scalds caused by the high temperature.

5. When the cleaner stops automatically due to water shortage in the working process, the spray gun should be closed and locked to avoid scalds caused by steam which automatically return to work after water addition.

6. Be sure to turn off the main power supply after the work for the day is completed.

7. Cut off the power if any abnormal condition is found, or have it repaired by our company. Do not use it until it is troubleshot. Do not disassemble and repair it by yourself!

8. Clean the pipe with the scale remover twice a month or once a month in case of light work load, so as to extend the service life of the machine. Turn off the engine button before starting to remove the water scale.

9. Take good care of the cleaner and avoid wetting by rain. Do not wet the cleaner during water adding, otherwise it can cause circuit failure.

1. Instant heating type steam: The machine adopts the advanced instant heating type steam generator technology, the steam can be generated in 60 seconds after cold machine starting, and can be opened to be immediately used in the working process, the long preheating waiting time is not required, and the working efficiency is greatly improved.

2. High practicability: The requirement of cleaning the whole vehicle, including the exterior, door frame and air conditioning pipelines can be met, and the engine can also be cleaned.

Control Panel

The control panel is of a compact structure, multiple mechanical buttons are integrated on the control panel and correspond to different functions, multiple indicator lamps are designed for indicating different working states to facilitate real-time monitoring, and clear digital display of the temperature is well achieved.

Pressure Gauge

The pressure gauge is designed for clearly displaying the steam pressure in real time, effectively avoiding the overpressure risk and ensuring the safety of operators and equipment. The real-time running state of the machine can also be reflected, and the operating effectiveness can be well guaranteed.

Heat Dissipation Holes

Pushing Handle

Universal Wheel with Brake

The universal wheel makes the machine move conveniently, the brake can lock and fix the machine to prevent the machine from accidentally moving.

Complete Accessories

1. Preparation before use:

(1) Read the product manual carefully before use of the machine.

(2) Make sure that the power switch is correct and the sufficient power supply capability is available, and then connect the power supply correctly.

(3) Confirm the source of water supply and connect it with the automatic inlet valve, and then turn on the supply valve.

(4) Make sure that the start switch is turned off, and connect the gun with the machine. Turn off the drain valve at the bottom.

2. Connect the power, and the power indicator comes on. The water shortage indicator comes on, and the machine buzzes to alert water shortage. Water will be added into the tank automatically at the moment. Add water manually if automatic water entering is not connected. Stop adding water if the water fullness indicator comes on and the machine buzzes to alert it. Water will overflow at the overflow pipe mouth if water exceeds the level.

3. If the water shortage indicator does not come on, turn on the start switch. The heating indicator comes on and the machine enters the temperature rise phase. The pump indicator comes on for about 1 minute, and then the pump starts to supply water and outputs steam.

4. You can adjust the steam amount adjusting knob according to needs of steam amount.

5. Turn off the operating switch to stop the machine, and open the gun mouth to discharge the remaining steam. After the work for the day is completed, drain the tank by turning on the drain valve at the bottom. Discharge the accumulated water in the pipe by pressing the forced drain button at the back for several seconds during cold weather. Cut off the power and arrange the machine for the next use.