2. Select the corresponding power supply voltage, and ensure the machine is properly grounded.

3. Do not move the machine during use. Do not touch the running parts during operation. Do not put hands or tools into the machine during operation.

4. Do not overload the machine. Do not test the materials exceeding the stroke range.

5. Add lubricating oil to the mechanical parts in a timely manner.

6. After each test, clean the machine to keep it tidy.

2. Precise control: Equipped with a computer unit and dedicated testing software, achieving real-time display and monitoring of testing parameters, and fulfilling multiple safety protection functions.

3. Reliable clamping: Allowing replacement of different clamps to adapt to various tests, supporting clamp customization as needed and ensuring the sample is firmly clamped.

4. Superior performance: With the maximum capacity of 5000Kg/50KN, suitable for tensile testing of various materials such as plastic, rubber and metal materials.

5. Simple operation: With simple control, reducing the operating difficulty, and improving the operation efficiency and practicability.

Control Panel

The control panel is simple in structure and integrates the emergency stop switch and the power indicator, ensuring the safety and operation reliability, achieving real-time feedback of the running state and reducing the misoperation risk.

　

Clamp Assembly

The upper and lower clamps are made of high-strength materials, can bear the maximum capacity of 5000Kg, and are free of deformation or looseness after long-term testing. The samples can be effectively clamped in a short time, and the clamping efficiency can be greatly improved.
　

Limiting Device

The transverse beam and limiting block are combined to achieve effective limiting and avoid overload damage, the limiting block can be moved and locked freely to meet different testing demands, and the precise scale lines facilitate accurate positioning and avoid manual measurement error.
　

Back Plate

The back plate adopts the multi-port compatible structure, can be perfectly connected with the testing system, effectively resists the electromagnetic interference in the working environment and ensures the testing results are accurate and reliable. The independent modular design facilitates installation and maintenance.

　

Supporting Legs

The supporting legs are designed for stably supporting the machine body, keeping it level and balanced, effectively reducing the shock and noise during operation and preventing the machine from movement.
　

Computer Unit

The complete computer unit and dedicated software system are provided for achieving reliable tensile testing, are easy to assemble and use, greatly reduce the operation complexity and ensure the testing data are reliable.
　

1. Specimen Preparation
The customer shall prepare test specimens in accordance with their own requirements (in compliance with product testing standards).

2. Test Preparation
Before testing, verify that the power supply meets the specified requirements, and confirm that the upper and lower limit safety devices are properly set.
Notes:
(1) Improper adjustment of the upper and lower limit safety devices may cause damage to the machine.
(2) The test specimen shall be vertical and free from tension after being clamped.
(3) Different fixtures shall be used for different types of test materials.

3. Test Steps
(1) Connect the AC110V power supply with reliable grounding.
(2) Start the machine.
(3) Adjust the upper and lower limit devices to proper positions and fasten them.
(4) Input all test parameters on the test interface and clamp the test sample securely.
(5) Perform the tensile test on the product.
(6) Repeat the test for the next product or disconnect the power supply.
(7) Record the test results upon completion of the test.
Notes: In case of emergency, press the Stop key to stop the machine immediately.
(8) If any abnormality is detected during testing, stop the machine promptly and disconnect the power supply if necessary. Operators shall not leave their posts without permission during the test.

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.