|
420MM/16'' Electric Steel Roller Thermal Laminator 110V |
|
|
|
|
|
|
 |
|
Product
Overview |
| The electric steel roller
laminator is a professional laminating machine specifically
designed for cold laminating and heat laminating operation in
the industries of printing, packaging, manufacturing and so on.
The laminator adopts the upgraded steel roller structure,
ensuring the high temperature resistance, high thermal
conductivity, high hardness and high durability and effectively
prolonging the service life. The steel roller laminator is an
optimal choice for commercial and household application to meet
different laminating requirements. |
|
|
Product
Parameters |
|
Maximum laminating width |
420mm (16.54'') |
|
Laminating speed |
5m/min |
|
Laminating temperature |
70-130˚C |
|
Power supply |
AC110V 50/60Hz 18A |
|
Heating power |
Single side 950W / Double side 1900W |
|
Product size |
65x52x52cm (25.6''x20.47''x20.47'') |
|
Net weight |
45.5kg (100.31LB) |
|
 |
|
Attention |
|
1. Always handle the laminator with care.
Keep hands, long hair, loose clothing and other articles away
from the rollers to avoid entanglement.
2. The temperature of the heat rollers can reach
130℃.
Avoid touching the heat rollers during operation or shortly
after power has been removed from the laminator.
3. Ensure the local power supply is
consistent to the power supply indicated on the nameplate of the
product.
4. When the machine is not in use, the upper
roller should always be lifted and in the ‘Open’ position to
prevent the bottom roller from deformation and damage. |
|
|
Product
Features |
|
|
| The
laminating machine is of a metal structure, making it
attractive, firm and durable, having the higher safety and lower
maintenance cost, and playing an important role in achieving
high structural rigidity and technological stability. |
|
The upgraded steel
roller is designed for efficient cold and heat laminating
processes. It has the extreme stability and deformation
resistance at the high temperature and pressure and effectively
removes the bubbles and wrinkles for the laminated materials. |
|
|
|
| The
temperature controller can be used for accurately controlling
the laminating temperature to meet different laminating
requirements. The single-side laminating mode and the
double-sided laminating mode can be freely selected as needed,
achieving high adaptability and practicability. |
|
The laminating
speed, automatic/foot pedal control mode and rotating direction
can be adjusted and controlled accurately, thereby ensuring the
laminating operation is smoothly conducted, and different
requirements for speed, mode and direction can be well met. |
|
|
|
| The
steel roller can be controlled by the handle to be lifted or
pressed in the working process, so the roller is effectively
protected while the material and film are firmly combined.
Operation and control are easy and convenient. |
|
The hollowed
protective cover is designed for safely protecting the steel
roller and preventing the operator against scalds and accidents.
Moreover, by means of the hollowed structure, the operator can
easily observe the roller state while effective heat dissipation
is achieved. |
|
|
|
| The
paper limiter can facilitate paper feeding, prevent the paper
from inclination, greatly reduce the laminating deviation and
ensure a better laminating effect. |
|
The film roll is
effectively supported by the metal supporting rod, firmly fixed
by the fixing clamps on the two sides and easily adjusted by the
black knob to cater to different laminating demands. |
|
|
Operation
Method |
|
1. Turn on the Power switch, turn the Motion
switch on the forward position and turn the control switch on
the Foot control position.
2. Install the film rolls on the supporting
rods and fix the film rolls at the center position, make sure
the adhesive side of film to face away from rollers. The top and
bottom film rolls should be aligned with each other if doing
double-sided lamination, which prevents the exposed adhesive
from making contact with the rollers.
3. Thread the film according to the Diagram.
4. Use a lead board to evenly push the film
into the main roller nip. Pull the film by the pull rollers
while pressing the Foot switch.
5. Set the laminating temperature to a certain
degree (normally 70~100℃)
according to the nature of film. You need to adjust it to get
the good laminating result. Do not set the temperature over
115˚C to avoid damaging the laminator. After the work of
laminating is finished, always lift up the upper steel roller to
prevent the bottom roller from deformation and damage.
6. Clean any adhesive that may stick to the
main rollers to prevent the adhesive from accumulation. |
|
|
Product
Display |
 |
 |
 |
 |
|
Item Number (120107): 1 x
Electric Steel Roller Thermal Laminator 16'' 110V |
|
|
You can make
order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost. |
