|
|
|
Air-operated Hydraulic Motorcycle Lift Table 1000LBS |
|
|
|
|
|
|
 |
|
Product
Overview |
| The air-operated hydraulic
motorcycle lift table is a mechanical device specifically
designed for lifting motorcycles to the appropriate working
height safely and conveniently to achieve motorcycle repair,
maintenance and modification instead of a conventional ground
repair mode. It has the lifting load of 1000LBS and the lifting
height of 195mm-780mm, and adopts the pneumatic and hydraulic
driving mode to reliably lift motorcycles, improving the lifting
efficiency and stability. The pneumatic hydraulic lift table is
an optimal choice for motorcycle repair shops, motorcycle
dealers, motorcycle modification workshops, motorcycle fanciers
and so on. |
|
|
Product
Parameters |
|
Lifting weight |
1000LBS |
|
Lifting height |
195-780mm (7.68-30.71in) |
|
Power unit |
Pneumatic hydraulic |
|
Net weight |
122.5kg (270LBS) |
|
Platform width |
66cm (25.98in) |
|
Platform length |
180cm (70.87in) |
|
 |
|
Attention |
|
1. Before operation, be sure to fix the
motorcycle lift table on the ground with adjusting screws to
prevent the lift table from sliding during operation.
2. After placing the motorcycle onto the
platform, be sure to clamp the front wheel of the motorcycle to
prevent it from slipping, tilting or falling.
3. After lifting, be sure to insert the set
spindle into the front lifting arm to prevent from unintentional
slow lowering.
4. Do not overload the rated capacity.
Overloading can cause damage to the lift table and may result in
personal injury. |
|
|
Product
Features |
|
|
| The
lift table is made of thickened steel materials, making it safe,
durable and reliable. It has the high load capacity of 1000LBS,
the structural strength and rigidity are greatly improved,
bending deformation is effectively reduced, and the high
durability, long service life and operating stability are
effectively guaranteed. |
|
The motorcycle
adopts a high-quality hydraulic cylinder as a core power unit,
effectively ensuring the lifting efficiency, stability and
safety. The air cylinder can provide the powerful and stable
lifting force for motorcycle repair, maintenance and
modification, has good sealing protection performance and low
fault rate. |
|
|
|
| The
lifting mechanism is of a scissor type lifting structure and
achieves the good balance of the space efficiency, rigidity
strength and operation safety through the unique design, making
the lifting height adjustable within the range of 195-780mm. The
X-shaped lifting arm adopts the crossed axis hinge design,
ensuring safety and reliability. |
|
The front wheel of
a motorcycle can be stably fixed by the fixing support. The
rigid frame can be adjusted by the handle to clamp and release
the front wheels in different sizes in the working process. The buffering pads on
the inner side of the rigid frame can effectively avoid rim
damage caused by metal hard contact, achieving reliable clamping
and safety protection. |
|
|
|
| The
three-section type steel plate stably support the whole
motorcycle in the working process, the slope structure
facilitates entry and exit of motorcycles, the protrusions on
the surface of the supporting plate increase the friction,
reduce the skid risk and facilitate stable parking of
motorcycles. |
|
The whole lift
table can be effectively fixed through the fixing bolts at the
front end and conveniently moved through the moving wheels at
the rear end, well adapting to different working environments
and meeting different working requirements. |
|
|
|
| The
lifting arm can be limited by the fixing rod in the fixing holes
to avoid sliding in the working process, the two sets of holes
are designed for limiting different lifting heights, and the
safety and practicability are well guaranteed. |
|
As a professional
lifting device, the pneumatic hydraulic motorcycle lift table
can effectively lift and support different motorcycles to
facilitate daily maintenance, repair, overhauling, tire
disassembly and assembly, system overhauling and other
operation. |
|
|
Product
Display |
 |
 |
 |
 |
|
Item Number (170180): 1 x
Air-operated Hydraulic Motorcycle Lift Table 1000LBS |
|
|
You can make
order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost. |
|
