|
|
新建网页 1
|
|

The ultrasonic industrial humidifier
is a device that uses the principle of ultrasonic high-frequency
oscillation to atomize water into ultra-fine of 1-5 microns, and then
uses a pneumatic device to diffuse the water mist into the air, thereby
achieving uniform air humidification without heating adding chemicals,
allowing it to float in the air, thus achieving humidification.
Appropriate relative humidity plays a decisive role in improving product
quality, reducing scrap rate anti-static, dust removal, air
purification, and environmental improvement. |
|
 |
 |
Parameters :
| Fog volume |
≥ 7.5kg/h |
| Humidity |
1%-99% |
| Power supply |
110V |
| Power |
800W |
| Control
method |
Humiditycontrol Time
control |
| Reference
usage space |
70-140㎡ (754-1506sq.ft)
|
| Hole |
4.33inch(110mm)*1 |
| Water supply
quality |
Purified water, tap water
(softened) |
| Air Volume |
170m³/h |
|
| Product
features: ●The case is
made of stainless steel, which is sturdy and durable.
●High humidification intensity:
Ultrasonic industrial humidifiers can quickly increase air humidity,
with high humidification efficiency.
●Uniform humidification: The
ultrasonic vibrator vibrates the water molecules into tiny droplets,
which are then dispersed into the air by a fan, achieving uniform
humidification.
●Easy maintenance: It uses an
integrated atomizer inside, replaceable chips, long service life, and
simple maintenance. |
 |
|
Details: |
 |
Two control methods are
available. Humidity
control and time control. |
| High-quality fans, improve
work efficiency. |
 |
 |
Hole:4.33inch(110mm)*1 |
A water pipe
A moisture probe |
 |
 |
Equipped with high-quality
atomization module. |
| The high-quality base wheels
can be locked during operation, making the machine safe and efficient. |
 |
|
Instructions for
Use |
|
● Environment
and Installation Check
Ensure the
device is installed correctly: Verify the machine's stability. It must
be placed on a level surface (to prevent tilting, which may cause water
leakage or uneven atomization). Keep away from heat sources, corrosive
gases, and large appliances (to avoid interference or damage).
Inspect mist
outlet ducts: Verify all connections are secure, free of blockages or
damage. Position the air outlet toward the target humidification area
(avoid direct airflow toward equipment or products).
● Water Circuit
and Power Supply Check
Water
Connection: Ensure the inlet hose is securely connected with no leaks.
Open the water tank lid and add clean tap water or deionized water
(avoid impurities clogging the atomization plate; never use dirty water
or saltwater). The water level must be above the black sensor head of
the atomization module (a level too low will trigger protection and
prevent startup; too high may cause overflow).
Power Supply
Inspection: Verify that the device's power supply voltage is 110V, and
inspect the power cord for any damage.
● Power on the
unit and activate the green switch. The indicator light on the control
panel will illuminate. You can now select the control mode manually and
adjust settings using the "∨" and "∧" keys.
If using
humidity control mode, please install the humidity controller first. |
|
Precautions |
| ●For the first use,
it should be placed at room temperature for half an hour before turning
on and using. ●Use clean
water with a temperature below 40 degrees.
●Keep other home appliances away
from the machine while it is working.
●Please do not add additives that
are not produced or supervised by a professional production line to the
water.
●Do not place the humidifier on
hollow objects to avoid resonance noise.
●Please do not turn on the machine
without water.
●The humidifier's water tank and
the atomization module inside should be cleaned regularly, generally
once every 2-3 months.
●When the humidifier system is not
used for a long time, the excess water in the water tank should be
drained to prevent the water from soaking the atomization module for a
long time, accelerating the aging rate and affecting the service life of
the humidifier.
●Since the size of items placed in
the factory, the number of machines, air intake, exhaust, and
temperature levels all affect the indoor humidity, is recommended to
appropriately increase the humidification capacity when selecting the
model. |
 |
|
Item
Number: Ultrasonic
industrial humidifier cooler sprayer 7.5kg/h--191061 |
|
You can
make order with no worry.
Any concerns just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost. |
|