White Side-mounted Loft
Wall Ladder Stairs |
|
|
|
|
Color: White.
The bracket and ladder are made of high-quality Mg-Al Alloy with wear
and rust resistance characteristics, more durable than ordinary steel.
The special S-shaped strings adopted by the attic access ladder enhance
the bearing capacity, up to 660 lbs. |
Attention |
1. Please clearly confirm the SIZE of this ladder
before ordering.
2.
Please confirm the installation type of this ladder, it CAN NOT be
installed on ceiling.
3. DO
NOT stand under the ladder when you install it.
|
Parameter |
Vertical Height |
≤ 280 cm / 9.19 ft |
Color |
White |
Frame Size |
70 x 90 cm/27.56 x 35.43
in. |
Material |
Aluminum-Magnesium Alloy |
Step Size |
40 x 14 cm/15.75 x 5.51 in. |
Amount of Steps |
11 |
Weight Capacity |
660
lb |
|
|
|
Matters needing attention:
1.Please install the fixed frame according to the height on our
website. If the installation height is not appropriate, please contact
us to solve the problem!
2.When pulling down the ladder, do not stretch it backward too much.
Just put it on the ground naturally. Excessive stretching will cause
uneven stress and may cause tilting. If you are not sure about the
stretching position, you can take photos to contact us!
3.If it is used for several months or frequently, you can check
whether the screws are loose as a routine maintenance of the stairs.
4.If there is a fault during use, please contact us first, and do not
repair it yourself to prevent improper maintenance! |
|
Users are responsible for the proper operation and
maintenance of the equipment they use. Some equipment will quickly
become damaged and unsafe if abused or subjected to improper demands. If
equipment is regularly maintained and not abused, you will get the
maximum safety and service performance from loft wall ladder stairs. |
-
Do not overload ladder stairs.
-
Do not knock it
vigorously.
-
Do not disassemble it
casually.
-
Do not open the tripod forcibly.
-
Do not play movement on ladder stairs.
These uses create severe impact and shock loads that may
lead to steps and equipment failure. |
|
|
Check
Equipment |
Periodically turn ladder stairs on its end or side
and check the following:
-
Look for broken welds or deck boards.
-
Tighten loose nuts and bolts.
-
Look for ladder stairs frame distortion caused by
overloads and impact loads.
All the check is for your safety.
|
|
Item Number(022500):
|
|
You can make
order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost. |