Foam removal method:

1. Condenser bottle mouth downward to let the foam out by itself.

2. Do not shake the condenser when there is a small amount of foam left in the condenser. Shaking is easy to damage the glass tube in the condenser. An acidic liquid can be poured into the condenser to dissolve the foam.

Specification:

Model: RE-201
1. Capacity of evaporating flask: 1L
2. Capacity of collecting flask: 1L
3. Vacuum: -0.098Mpa
4.Rotating speed: 0 - 120 R/min
5. Evaporating speed: ≥1.5L/H20
6.Temperature range:Room temperature-99℃
7. Motor power: 40W
8. Water bathing power: 1KW

9. Voltage: 110V

Features:

Rotator consist of a group of reliable micro motor and integrated circuit control device. Under the effect of the electronic speed regulation, it can be rotated stably within the

range of 10-120rpm, reaching the international advanced level
1. Special fluoro rubber sealing, high corrosion resistance.
2. High evaporating efficiency & high recovery.
3. Modular design, easy to connect to other appliance.
4. Easy to install and disassemble, easy to operate & maintain.

5. The main body extensively adopts stainless steel and aluminum alloy, firm and beautiful
6. RE-201 rotary evaporator's heating bath is lifed manually, lifting distance is 120mm

7. Two kinds of condenser structures for choosing, one adopts double line convection principle, used for inorganic solvent evaporation. The other is a single line container

with a interlayer cooled by water and dry ice, used or evaporating the organic solvent.

Using vertical condenser to save space.

8. The rotating shaft using high borosilicate glass, the joints using fluorine rubber framework oil seal to seal, high tightness and better effect