|
Hand-push Cement
Ground Grinder 220V |
|
|
|
|
|
|
|
Note：The ground polishing
machine cannot polish the ground where glue exists. |
 |
|
Features 1. The pure copper motor is
of high quality and the product is sturdy and durable.
The new
stator and rotor of the motor can easily realize the conversion of
electrical
energy and
mechanical energy.
2.The diamond chassis is sharp, hard, resistant to wear and high in work
efficiency
and
quality.
3.High performance, stable life, long service life.
4.Highly adaptable cement floors can also be fully hardened and work can
be done
at the
root of the wall.
5.With dust suction fan, dust-free operation.
6.The grinding head can be replaced for grinding, polishing,
rust removal and paint
removal. |
|
Parameter |
|
|
Grinding Width:
500mm
Motor Speed:
1430r/min
Voltage: 220V
Power:
7.5kw
Phase Number:1
Fan Power: 0.75kw
Maximum Airflow:
180mm³/h
Dust Loading Capacity:
40L
|
 |
|
Details |
 |
 |
9 head grinding chassis, grinding area is
large, high efficiency. |
Water pipes can be connected to reduce
dust, and keep the machine dry when
not
in use(Please turn off the fan before
connecting the
water pipe). |
 |
 |
Free PVC dust cover to prevent dust from
flying out. |
Rubber damping wheel, running more
smoothly. |
 |
 |
40L large-capacity dust collection box,
without
frequent cleaning. |
Aviation plug, safe to use, fast and
efficient
connection. |
 |
 |
Double suction fan, complimentary two
filter elements, good suction effect. |
Special dust removal device, gently pull,
dust
will fall. |
 |
|
|
 |
Give away 5 meters of wires. The maximum
length of the
wire
connected to the machine can be 90 meters. The
specification is three-core wires. Each wire should not be less
than 6 mm ² of pure copper
wire. The wire must be
connected to the air switch, and the rated
current of the air
switch is about 63A. As shown in the picture of
wiring
mode,
please contact us if you have any questions. |
|
Precautions for use |
1. The input voltage should not be too low.
2. When using, first lift the machine head off the ground,and then turn
on the
switch. When
the machine head rotates normally, gently place it on the ground.
3. When working, the machine head swings left and right,then moves
forward, and
cannot
stop in place.
4. In case of power failure during operation, the switch should be reset
and cannot
be
stopped at the original position to avoid burning the motor when the
power is
on.
|
 |
|
|
|
Item Number: Hand-push Cement Ground
Grinder 220V 238004 |
|
|
You can make
order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us
with low cost. |
