2. Wear goggles and other protective equipment to avoid accidents during operation.

3. Do not touch the running parts during operation. Do not put hands into the machine during operation.

4. Do not let the machine unattended during operation.

5. Be sure to clean away the anti-rust oil on the chuck before starting, and turn the chuck by hand to prevent the chuck from jamming and causing the circuit board to burn out!!

6. Do not process the materials exceeding the limit ranges. Do not overload the machine.

7. Do not adjust the chuck or replace cutters when the spindle is rotating.

8. Do not open the protective cover during operation. Do not modify the machine without authorization.

2. In the X-axis direction, automatic feed can be achieved, and no manual operation is required. The automatic feed speed can be adjusted and reaches 0.01mm-0.4mm!

3. There are three ways to start turning: manual start, automatic start, delay automatic start.

4. Indexing function: you can switch the direction of turning tool through "DIR" button, and the angle can be cleared with one click.

5. Control panel: set and save parameters and then start the machine. It realize the reciprocating turning function and thread turning.

6. High expandability: The 0.005mm digital grating scale is additionally designed for high-precision measurement and positioning, and the special mounting base is stable and practical.

Control Panel

The control panel integrates the displayer, control buttons and speed regulator, supports one-key switching of metric/imperial thread, and substantially improves the thread processing efficiency. The speed can also be steplessly adjusted within the range of 50-2500rpm through the adjusting knob.
　

Transmission System

The spindle transmission and electronic gear change system is adopted to achieve automatic feeding and thread processing, and is free of manual gear change, greatly improving the processing efficiency and precision, ensuring stable and low-noise operation and reducing the maintenance cost.
　

Tool Post

The adjustable tool post allows the operator to easily change the cutting tools, greatly shortening the tool changing time and well stabilizing the cutting tools. Multiple handwheels with clear scales can achieve accurate fine adjustment, meeting the precision turning requirements.
　

Three-Jaw Chuck

The Φ125mm high-precision three-jaw chuck has a large clamping range and high concentricity, shortening the alignment time and improving the processing efficiency. It is stable, wear-proof and durable. The protective baffle ensures safety and operation convenience.
　

Tailstock

The tailstock is of a high-rigidity structure, can cooperate with the precise guide rail to support the workpiece stably and reliably, effectively reduces the cutting vibration and improves the processing precision and surface smoothness.
　

Grating Scale

The digital grating scale adopts a high-precision digital display system, can feed back the cutter position in real time, clearly displays readings, supports multi-mode switching, and can well adapt to different working environments.

Control Switches

The F/O/R switch and emergency stop switch are integrated to achieve reasonable layout and convenient operation. The personal safety can be well guaranteed in case of emergency, and the switches are resistant to impact and wear.
　

Base

The lathe base is stable in structure and convenient to use, is not prone to rusting and corrosion, and can well adapt to various environments. The storage cabinets are designed for storing different tools orderly and avoiding loss and damage.
　

Limit Switch

The industrial limit switch is additionally designed for achieving limiting protection, preventing collision with the tailstock or chuck and avoiding equipment damage and safety accidents. It is durable, sensitive and reliable in performance.

Wide Application

The metal lathe is suitable for multiple processing tasks, such as turning, drilling, threading and cutting. It can meet most of your DIY processing needs and is an ideal choice for metal machining and precision manufacturing.
　

2. Clamp and lock the workpiece via the three-jaw chuck, install the lathe tool and adjust it.

3. Turn on the digital grating scale, ensure the X/Y readings are normal, and reset the coordinates.

4. Turn on the power switch, select the thread standard on the control panel, and set processing parameters.

5. Press the start button, turn on the direction switch, and start processing the workpiece.

6. After processing, press the stop button, wait for the spindle to stop completely and disconnect the power supply.

7. Clean and maintain the machine thoroughly.

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.