220V Brake Drum Disc Lathe

Say goodbye to these common driver frustrations:

✅ Warped Brake Discs

✅ Steering Wheel Vibration

✅ Annoying Brake Noises

✅ Longer Stopping Distances

This device combines high-precision cutting with robust stability, featuring a sturdy 38mm spindle that ensures vibration-free cutting. Repair accuracy reaches within 0.003mm, while its 220V to 12V safety voltage design comprehensively safeguards operational safety. Its applications span automotive repair shops, dealership service centers, and fleet maintenance facilities. It efficiently resolves common issues such as warped brake rotors, vibration, and abnormal noises, directly restoring braking performance and avoiding the high costs associated with complete replacement. Our machine delivers professional-grade resurfacing quickly and easily - saving you time while eliminating customer complaints.

DL-718L: (Disc Resurfacing Machine)

DL-985L: (Drive Unit)

2. High Disc Precision: Repair accuracy is controlled within 0.00–0.005mm, far exceeding industry standards, guaranteeing near-zero end runout and thickness variation in brake discs.

3. Safe voltage conversion: Utilizes 220V to 12V safe voltage drive. Even direct contact with the cutter poses no electric shock risk, fully safeguarding operator safety.

1. Confirm the rotation direction of drive unit DL-985L matches the arrow indicator on DL-985.
2. DL-985L on 4W cars: set motor switch to position ‘1’ to ensure correct rotation direction.
3. If significant ridges exist on the brake surface, remove them without exceeding the maximum cutting depth.
4. Operate the slide of DL-718L until tool bits align with the center of the brake surface.
5. Carefully turn adjustment knobs clockwise until the sound of tool bits contacting the brake disc becomes just audible.
6. Gently move the slides toward the hub of the brake disc.
7. When using the positive angle tool bit, the adjustment knob may be engaged by a maximum of 16 clicks.
8. When using the straight tool bit, the adjustment knob may be engaged by a maximum of 4 clicks.
9. 1 click equals 0.05mm.
10. Set adjustment knobs (clockwise) to the selected value (minimum 0.05mm, maximum 0.8mm).
11. Activate autofeed using the switch and secure by locking the knob.
12. After machining, stop the DL-718L autofeed by pressing the button a second time.
13. Then stop drive unit DL-985L.
14. Verify that both inner and outer brake surfaces are completely machined.
15. Confirm the brake disc thickness meets the minimum replacement specification in the workshop manual. If below threshold, replace the brake disc.

1. Never operate equipment when feeling unwell or fatigued.
2. The DL-718L brake disc grinder must be used in conjunction with the DL-985L main unit.
3. Do not exceed the grinder's rated load capacity.
4. Keep work area clean and organized. An untidy workspace may lead to accidents.
5. If the equipment is to be stored unused for an extended period, it must be properly packaged and stored in a location out of reach of children.
6. During operation of the equipment, do not allow children to approach.
7. Except for the operator, no other persons should be allowed to touch the equipment, power cords, or related components within the operating area.
8. Do not operate the equipment under the following conditions:
- Where there is a potential risk of explosion.
- When the weather is excessively dry or humid.
9. Do not operate the equipment outdoors in rainy conditions.
10. When installing or removing automotive parts, always follow the vehicle manufacturer's safety codes and installation/removal guidelines.
11. Avoid wearing loose clothing or jewelry, as they risk getting caught in the equipment.
12. Never pull on the power cord to disconnect it from the wall outlet.
13. Operators with long hair should tie it up securely with a hair net.
14. When turning on the lathe, hot metal chips may fall or fly off.
15. To prevent potential fire hazards, injuries, or burns, follow these precautions:
a. Wear safety goggles;
b. Wear protective clothing;
c. Wear appropriate gloves;
d. Wear a dust mask;
e. Ensure a fire extinguisher is readily available.

220V Brake Drum Disc Lathe *1

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.