|
|
新建网页 1
|
Straight Line Automatic Edge Banding
Machine Full Automatic High-speed Edge Banding and Trimming Machine 110V |
| The multifunctional edge banding
and trimming machine is mainly used for sealing the edge of the
plate section. It has a compact structure, reasonable layout,
beautiful appearance, with straight edge banding, double-sided
gluing, automatic tape breaking, end-to-end alignment, automatic
plate feeding, upper and lower trimming, double-sided polishing
and other functions. The edge banding machine can be widely
applied to furniture manufacturing, building decoration,
packaging and other industries. |
|
Voltage |
110V |
|
Edge banding speed |
0-8m/min |
|
Trimming motor power |
650W*2 |
|
Conveyor motor power |
140W |
|
Polishing motor power |
180W*2 |
|
Power of vacuum cleaner motor |
1200W |
|
Edge thickness |
1-45mm (0.04-1.77 inches) |
|
Edge height |
1-45mm (0.04-1.77 inches) |
|
Heating time |
10-15min |
|
Adhesive volume |
1000ml |
|
Net weight |
140kg (308.6LBs) |
|
Trimming method |
Double-sided trimming |
|
Adhesion method |
Double-sided adhesive coating |
|
Control mode |
Intelligent temperature control |
|
Disconnection mode |
Automatic strip breaking |
| 1. The operator should
prepare the air compressor by yourself.
2. Do not touch the running
parts during operation.
Do not put the hands into the machine.
Do not allow people or objects to be located next to the
running parts of the machine.
3. The operator must be
trained and qualified and is familiar with the machine operation
skills.
4. Ensure the boards, edge
banding strips and hot melt adhesive meet the edge banding
requirements. |
|
1. The machine can be directly
applied to the plate linear edge banding operation, and the
portable edge sealing machine is also suitable for a variety of
different materials of the edge sealing strips.
2. Multi-functional microcomputer
sealing machine adopts the special structural design, can make
the plate with the edge sealing tape to ensure that the adhesive
is more uniform and firmer, and the edge sealing effect is more
perfect. The special design of the glue pot increases the volume
of the glue pot and greatly reduces the preheating time, which
can ensure sufficient melting amount.
3. Manual feeding coupled with
manual control and motorized roller pressure mode can accurately
and quickly carry out the edge banding process, each part of the
work design is strict and orderly, and no degumming overflow
phenomenon exists. |
 |
|
 |
|
Control Panel
The control panel is of a compact structure, has multiple
functions, can achieve precision control over the temperature,
the edge banding speed, the feeding speed and starting of
different working procedures, and effectively improves the
working efficiency.
|
|
Height Limit Part
The height limit part is designed for limiting the height of the
edge banding strip to ensure smooth feeding of the edge banding
strip during edge banding. It can be easily adjusted to adapt to
different edge banding strips and meet different requirements.
|
 |
|
 |
|
Press Wheels
The two rows of press wheels are adopted to stably press the
board to be sealed, effectively prevent the board from deviation
in the feeding process and greatly improve the edge banding
effect and quality.
|
|
Trimming Assembly
The functions of end-to-end alignment, upper and lower edge
trimming and double-sided polishing can be well fulfilled, the
edge trimming and polishing operation is reliable and perfect,
and the quality of finished products is higher.
|
 |
|
 |
|
Height Adjusters
The height of the transverse beam can be adjusted precisely and
easily, the scale marks are clear and obvious, and the height
uniformity and balance can be effectively guaranteed.
|
|
Dust Bag
The dust bag can effectively collect the dust, adhesive residues
and other waste during edge banding, keeps the working
environment clean and orderly and avoids pollution.
|
| 1.
Check whether all parts of the machine are intact and ensure the
machine can operate normally.
2. Connect the machine to the air
compressor and the 110V power supply.
3. Add the appropriate quantity
of hot melt adhesive to the adhesive pot.
4. Turn on the power switch, set
the heating temperature and preheat the machine to the set
temperature.
5. Adjust different parameters to
achieve proper edge banding operation.
6. Conduct trial edge banding,
and carry out normal operation after the trial operation is
perfect.
7. After completing the edge
banding of all boards, turn off the machine, wait for the
machine to cool down, and clean away the residual adhesive, dust
and other waste. |
|
|
Suitable for side sealing: flexible melamine-impregnated paper,
wood veneer, plastic and other furniture edge sealing materials.
Note: The rubber surface must be smooth.
Plastic side sealing tape: must be coated with hot melt adhesive
to prevent deformation when heated. The coated surface of the
plastic side tape must be pre-coated with back adhesive (can
make the back side tape and hot melt adhesive activator).
Suitable for hot melt adhesives: medium and low temperature hot
melt adhesives with melting point below 120℃-170℃.
Suitable for the workpiece frame: can be bonded with hot melt
wood, flower boards, medium fiber boards, particle boards and
other plate frames. |
|
|
 |
 |
 |
 |
|
Item Included (033427):
1 x Straight Line Automatic Edge Banding Machine 110V |
|
You can
make order with no worry.
Any concern just feel free to let us know, we'll reply in 24
hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days
after payments cleared. Orders are processed from Monday-Friday;
Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the
consumables.
We stand behind our products all the item, so even if your
warranty period has expired, you can still seek for service or
technical support from us with low cost. |
|
