DO NOT put hands into the machine during operation!!!

2. Wear the high-temperature-resistant protective gloves and goggles to protect the operator.

3. Do not put impurities (metal, stones, etc.) into the feeding inlet.

4. Do not leave the machine unattended during operation.

5. Ensure reliable grounding of the machine. Do not touch the electrical parts with wet hands.

2. High Productivity: Up to 132-154LBs/h, large output, meeting the batch production demand.

3. Multiple Shapes: Equipped with 4 molds, capable of producing various feed products in different shapes, meeting the feed processing requirements for different poultries and livestock.

4. Good Puffing Effect: Uniform puffing size and specification, good puffing quality and stable performance.

5. Wide Application: Suitable for puffing soybeans, corn, piglet feed and other livestock/poultry feed, and applicable to feed processing plants, livestock farms, family farms, etc.

Driving Motor
The high-performance motor is adopted to provide stable driving force for puffing operation, ensuring the machine operates continuously and stably for a long time, and improving the working efficiency and stability.

　

Feeding Hopper
The feeding hopper is of a slope structure, making feeding convenient and smooth. The adjustable baffle is designed for controlling the feeding flow of the material outlet, and well adapts to different raw materials.

　

Cutting Assembly
The cutting assembly can rotate at uniform speed to cut off the discharged puffed products, the cutting efficiency and quality are well ensured, and the cutting assembly is firm, durable and efficient.

　

Supporting Frame
The steady supporting frame is made of cast iron, effectively improving the structural strength and durability, stably supporting the puffing machine body and preventing the machine body from falling down during operation.

　

1. Install the belt and tighten it properly.

2. Start the machine, and let it run idle for a while before slowly adding a small amount of dampened rice (mixed with a small amount of water, just enough to moisten the rice). When the extruded products begin to emerge normally, immediately start adding small amounts of dry rice continuously. At the beginning of processing, feed the rice slowly. Only after the extruded products have formed properly should you gradually increase the feeding rate. The feeding amount should be based on the feed amount that the motor can handle.
If you notice rice backing up at the inlet, this is because the machine hasn't yet reached normal operating temperature and too much rice was added, causing output congestion and rice flowing backward. In this case, stop feeding rice until the backed-up rice clears, then resume feeding. Continuous operation for at least 5 minutes will raise the temperature.

3. During processing, if you observe rice or extruded products clumping and backing up at the inlet along with steam that smells burnt, this is caused by insufficient feeding leading to rapid temperature increase. Use a small wooden stick to remove the backed-up material and increase the feeding rate immediately. If the blockage is severe and material cannot flow through, please shut down the machine, disassemble it, clean it and then restart the machine.

4. After completing processing, let the machine run idle for 15-30 seconds to allow residual rice inside to turn yellowish from heat. Then turn off the power and remove the machine head nut, screw shaft, screw sleeve, and 8-hole die. Clean all rice residues thoroughly to prepare for the next operation.

5. If the extruded products come out too hard and crispy, this is related to the rice variety and moisture content. You should either reduce the feeding rate, switch to drier rice, or replace the screw sleeve.

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.