12KW Oil Type Mold Temperature Controller Machine Plastic/Chemical Industry 200-240V 3PH

WARNING‌‌: When performing maintenance on electrical components, disconnect the main power supply in advance and ensure the equipment is de-energized before starting any operation.
- Replace fuses only with the ‌same specified rating‌; never short-circuit the fuse holder.
- If electrical components become damp or exposed to water, metal parts of the equipment may corrode or rust, potentially leading to short circuits in severe cases.

‌WARNING‌‌: During operation, the internal system is under ‌high temperature and high pressure‌. Direct contact may result in severe burns.
- Before conducting pipeline maintenance, allow the equipment to ‌cool down and depressurize fully‌.
- Ensure the system is at ‌normal temperature and pressure‌ before any intervention.

Efficient Airflow Design for Stable Performance
The machine features a large number of ventilation openings on the housing, forming efficient airflow paths. This design quickly dissipates heat generated by the internal electrical control system and heating devices, effectively preventing performance degradation or shutdown caused by overheating. Even under continuous high-load operation, it ensures precise and stable temperature control.

Emergency Stop Switch
The emergency stop switch is a key safety device of the mold temperature controller. Once triggered, it immediately cuts off the main power supply to the equipment, bringing all operating components such as the heater and pump to an instantaneous stop. This achieves an emergency shutdown, prevents accident escalation, and protects operator safety as well as the mold and equipment from further damage.

Easy Mobility and Stable Positioning
The equipment is equipped with four swivel casters on the bottom, two of which are fitted with brake locks. This design allows the equipment to be moved easily and flexibly to the desired location within the workshop. Once in position, engaging the brake locks ensures that the equipment remains stable and stationary during operation, thereby ensuring safety and stable performance.

Control Panel
The PID control algorithm enables automatic adjustment of heating and cooling intensity and duration based on the deviation between the set target temperature and the actual temperature, thereby achieving high-precision, low-fluctuation temperature control. Combined with high-precision sensors and a clear digital display, operators can intuitively view and set temperature parameters, simplifying the operation process. This user-centered design combines ease of operation with powerful functionality, thereby achieving efficient management.

Standardized Interface – Safe & Leak-Proof
The ‌"Mold Outlet" and "Mold Inlet" feature industry-standard threaded connections, enabling quick and secure assembly. These interfaces are made from robust, durable materials and equipped with precision-machined sealing surfaces, effectively preventing leakage at connection points. Even under high temperature and high pressure, they ensure long-term reliability and stable operation.

- Oil-type mold temperature controller: Uses heat transfer oil as the medium, suitable for higher temperature applications.

- Heating cylinder: Made of 304 stainless steel seamless pipe to reduce pipe resistance and rust scale.

- PID control for heating/cooling operations to regulate the medium temperature and achieve high-precision temperature control.
- Safety protection functions: phase loss protection, low fluid alarm, overheat protection, overload protection, etc.
- Audible alarm and indicator lights: heating indicator light, pump overload protection flashing indicator light, phase reversal indicator light, low liquid level indicator light for easy operation.
- Programmable timer: allows setting automatic start/stop time for unattended operation.

I. Equipment Commissioning:
1. Complete the piping and electrical connections.
2. Turn on the equipment power and check whether the parameter settings are correct.
3. Observe whether the controller display matches the actual output and whether all components are operating normally.
4. Run the equipment within the specified operating range for 2 to 3 hours.
5. Check whether the equipment is operating normally and whether all data are within the normal range.

CAUTION: Never use salt-based anti-freeze mixtures, as they are highly corrosive and will damage the equipment!

II. Power On/Off
1. Check that power supply is available.
2. Turn on the power switch of the control box.
3. After power-on, the system will have a delay of several seconds. The PV display will show the software version code, and the SV display will show the remaining delay time. When the delay ends, the system will automatically enter the Main Operation Interface.
4. To start: Set the desired temperature and press the "Start" button.
5. To stop: Press the "Stop" button.

12KW Oil Type Mold Temperature Controller Machine Plastic/Chemical Industry 200-240V 3PH *1

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.