|
|
Product Overview
|
220V Steam
Label Shrink Machine Bottle Sleeve Labeling Machine with 18kw Steam Generator
 |
| Steam label shrink machine has the
advantages of high thermal efficiency, uniform temperature in
the shrinkage chamber, stable and reliable performance, accurate
temperature control. The packaged items are heated more
uniformly, the surface is more flat after packaging, not easy to
crease. It is the use of product labeling film wrapped around
the outside of the product, after steam heating, so that the
labeling film contraction wrapped tightly around the product,
the full display of the appearance of the goods, to increase the
aesthetic and the sense of value. Mainly used for daily
chemicals, beverages and other products after the set of heat
shrinkable labels. Any bottle type can be simply adjusted to
achieve the effect of flat appearance and beautiful shrinkage. |
| Product Parameters (Steam
Generator) |
| Voltage: |
AC220V |
| Power: |
24HP(18kW) |
|
Phase number: |
3 |
| Steam
temperature: |
171℃ |
| Rated
evaporation: |
53lbs/h(24kg/h) |
| Rated work
pressure: |
0.7Mpa |
| Water
volume: |
7.7gal(29L) |
| Machine
material: |
304 stainless steel |
| Package
size: |
34.3"*28"*43.3"
(87cm*71cm*110cm) |
| Net
weight/Gross weight: |
154.3lbs(70kg) /
224.9lbs(102kg) |
| Product Parameters (Steam
Shrink Machine) |
| Voltage: |
AC220V |
| Power: |
120W |
|
Phase number: |
3 |
| Maximum
bottle diameter: |
3.5"(9cm)
(There's no height requirement. Bottles can be laid down.) |
| Production: |
5000-7000 bottles/h |
| Conveyor
speed: |
0-39ft/min (0-12m/min) |
| Vapo
tension: |
0.1Mpa |
| Steam
dosage: |
17.6lbs/h(8kg/h) |
| Steam
emission: |
Double side steam jet
plate exhaust, steam volume and orientation can be adjusted for
different products |
| Steam inlet
material: |
304 stainless steel |
| Heating temperature: |
167-185℉(75-85℃) |
| Suitable
shrink film: |
PVC/PP/POF/PE |
| Machine
material: |
304 stainless steel |
| Label
height: |
11.4"(29cm) |
| Tunnel
size(LxWxH): |
39"*3.9"*11.8"(100cm*10cm*30cm)
|
| Package
size: |
63.4"*20.9"*56.7"
(161cm*53cm*144cm) |
| Net
weight/Gross weight: |
134.5lbs(61kg) / 249lbs(113kg) |
| Product Features & Advantages
(Steam Generator) |
 |
Intelligent integrated design of
control panel, beautiful and easy to operate; Power switch
one key start, adjust steam size as needed; The
power/heating/water/alarm indicators are clear and safe to
operate.
|
The
pressure gauge has high accuracy and can clearly observe the
pressure change of the steam generator; The spring type
safety valve has high sensitivity to protect the safe
operation of the machine; The steam outlet is made of
stainless steel with high temperature resistance and long
service life.
|
|
 |
Automatic
replenishment pump can automatically replenish water when
the steam generator is short of water or no water. The water
level change is detected by the float of the water tank.
When the water level is lower than the set value, the water
refill process is automatically started to ensure the normal
operation of the machine.
|
When the
pressure inside the steam generator exceeds the set value,
the overflow port will automatically open to release excess
steam to ensure safe operation of the equipment.
The water inlet ensures that water enters the steam
generator smoothly. Back of
the machine is designed with overflow and water inlet,
equipped with water inlet pipe and drainage pipe, convenient
access to water, save worry and effort.
|
 |
The waste
water in the furnace should be completely discharged after
daily use, and the discharge pressure should be kept at
0.1Mpa.
|
This
machine has no plug and needs to be connected to the air
switch by the customer for use.
|
| Product Features & Advantages
(Steam Shrink Machine) |
|
 |
The control panel includes three
functions: speed control, emergency stop, start and stop,
which makes the operation easy to understand and safer.
|
Using
304 stainless steel chain plank conveyor belt, smooth surface, smooth operation,
can ensure the effect of thermal
shrinkage; The transmission speed can be adjusted, strong
adaptability.
|
|
 |
There are
two layers of guard bar on both sides of the conveyor belt
to prevent the bottle from turning over; The spacing of the
guard bar can be adjusted to adapt bottles of different
diameters. The
maximum packaging width is 9cm.
|
The steam
inlet is connected to the steam generator through a steel
wire pipe to ensure sufficient steam supply to meet the
heating demand of the shrink machine. The design of the
steam outlet ensures the smooth discharge of condensate,
avoiding the accumulation of water affecting the normal
operation of the equipment.
|
 |
The drain
tray is located in the lower part of the machine, and there
are four hooks on the machine to hang the tray, which can
effectively collect condensate and discharge it through a
centralized discharge system to keep the working environment
dry.
|
The foot
mounting provides stable support to ensure the stability of
the steam label shrinking machine during use. The upper and
lower height can be adjusted, and the adjustment range is
2"(5cm).
|
| Product Presentation & Details |
| Steam Label Shrink Machine *1 |
Steam Generator *1 |
Accessory Kit *1 |
|
You can
make order with no worry.
Any concern just feel free to let us know, we'll reply in 24
hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days
after payments cleared. Orders are processed from Monday-Friday;
Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the
consumables.
We stand behind our products all the item, so even if your
warranty period has expired, you can still seek for service or
technical support from us with low cost. |
|
