2. Never open the cover plate or insert hands into the trough during operation.

3. If abnormal noise, vibration, or excessive temperature rise is detected, stop immediately for inspection.

4. Do not allow metal, stones or other hard foreign objects to enter with the material.

5. Do not exceed the rated capacity to prevent motor overload.

6. The machine is not suitable for: high-viscosity paste materials, strongly corrosive chemicals, high-temperature materials (above 80˚C), long-fiber materials prone to entanglement, and large hard lumps.

2. Cycloidal pinwheel reducer with large reduction ratio, high load capacity and smooth operation.

3. Bolted cover plate design effectively prevents dust emission and material spillage.

4. U-shaped trough structure for smooth material flow and reduced clogging.

5. Helical screw blades are solidly welded to the shaft for uniform pushing force and stable conveying.

6. Simple structure for easy installation and maintenance with long service life.

Driving Motor

The 3-phase 3KW motor is firm and durable in structure, low in fault rate and high in reliability, has high starting torque and load capacity, and can easily adapt to the heavy-load working condition during conveying. It has good environmental adaptability and high compatibility.
　

Cycloidal Pinwheel Reducer

The reducer has a high reduction ratio and high transmission efficiency, is good in energy saving effect and excellent in impact resistance and is not prone to damage even when material blockage and heavy-load impact occur. It is wear-proof, durable, simple and stable.
　

Helical Blade

The stainless steel helical blade is resistant to wear and corrosion, is free of precipitation and heavy metal pollution and meets the conveying requirements of different materials. It is smooth, free of burrs, and easy to clean, effectively improving the conveying efficiency.
　

U-shaped Trough

The U-shaped trough is firm and durable, easy to clean and disinfect and resistant to corrosion and rust, can effectively prevent the materials from overflowing in the conveying process and can bear the material weight and helical operation vibration stably.
　

Material Outlet

The material outlet adopts a direct-through type large-diameter discharging structure, allowing the materials to be discharged smoothly and quickly, reducing the material blockage risk and adapting to different materials and various working conditions.
　

Cover Plate

The stainless steel cover plate is detachably installed on the top of the trough, can prevent dust and impurities from entering the trough while protecting the operator from accidents and injuries. It is sturdy, durable, and easy to replace and clean.
　

I. Pre-Start Checklist

1. Verify correct power connection and reliable grounding.

2. Check all fasteners for looseness.

3. Confirm the cover plates are installed and bolts are tight.

4. Ensure inlet and outlet ports are unobstructed.

5. Confirm no personnel or obstacles in the equipment area.

 II. Start-Up & Operation

1. Turn on the power switch and confirm the indicator light is on.

2. Press the start button, the motor drives the reducer, and the screw blades begin rotating.

3. Observe the running condition, and confirm no abnormal noise or vibration.

4. Feed materials uniformly into the inlet, and avoid large instantaneous feeding.

5. During operation, monitor the discharge to ensure smooth material flow.

 III. Shutdown Procedure

1. Stop feeding materials into the inlet.

2. Wait until the trough is empty of materials, and then press the stop button.

3. Turn off the power switch.

4. For extended shutdown, clean away residual materials from the trough.

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.