Horizontal angle: 40˚-55˚

Up-and-down movement: 45mm (1.7in)

Tail end: 127mm (5in)

2. The melding machine can create magnetic field, which may affect some sensing devices and clocks. Based on the same factor, people, who has electrical pacemaker in heart, can’t be located near the operating machine.

3. If you want to touch the machine during or after welding, you must wear protective gloves. Don’t touch it before the surface cools down.

4. Let a qualified engineer connect the distribution box, metal base and other relate connection.

5. Wear the safety helmet, protective mask, goggles, protective clothing, protective gloves, safety shoes and other protective equipment to avoid accidents.

6. Do not create electric arc on the gas bottle. Do not put the torch on the bottle or make electric pole connect it. The gas bottle only is used to special purpose.

7. Do not touch the torch, tip, nozzle, insulation cylinder and face of barrow after welding because the temperature is high. Do not make it be near of inflammable substance.

2. The high-magnetism magnet increases the dependability of operating and draft load to ensure the machine operates smoothly.

3. It can operate many machines on the basis of increase the dependability of operating and self-stop function.

4. The guide transfer switch can make it move toward right/left.

5. The guide device is screw locking type. The height of guide wheel can be adjusted by three methods.

6. The new spacing switch system increases the limited height of distance plate.

7. It can operate two welding torches to conduct plane welding or angle welding from two sides.

Operation Panel

The operation panel is of an integrated structure, can precisely control the start, stop, speed, torches and other parameters, and effectively improves the welding efficiency and quality.
　

Welding Torch Adjusting Device

The welding torch adjusting device can be used to adjust the arc starting point, the clear and accurate scale marks make adjustment effective and reliable, and the adaptability is higher.
　

Welding Torch Locking Device

The locking device can firmly fix the welding torch and prevent it from moving during welding, effectively avoiding welding accidents and reducing the reject rate.
　

Guide Wheel

The guide wheel can easily guide the welding machine during welding, has three height choices for adapting to different working environments and improves the practicability.
　

Magnetic Control Handle

The magnetic control handle is designed for achieving control over the magnet, ensuring the separation and attraction of the trolley and steel plate and improving the control effect.
　

Driving Wheel

The driving wheel is reliable and durable, can stably move in different working environments, effectively reduces the vibration and noise during operation and improves the convenience.
　

Turn off the control power and welding power, then do the following steps 1-4.

1. Make the control wire connected to the metal plug of the control plate, noticing the cleanliness of the plug.

2. Fix the torch to the mounting base and bind the power wire with the torch together to avoid damaging the plug. Note: When fixing the mounting base, you should use other tools and protect the torch’s insulation. Improper tools can lead to personal damages.

3. Connect the torch with the corresponding feeder.

4. Connect the control conducting wire’s core 2 metal plug with torch’s metal base of the feeder and put the plug into AC110V three-dimensional plug: the only signal, which connects welding power, is torch switch signal. It emerges from trolley.

5. Turn on the welding power switch and put the welding wire into the torch. (Feed the welding wire by mode switch.)
Note: When you put the welding wire into the torch, you must keep your eyes away from the welding wire which overhangs from the tip, else your eyes may be damaged.

6. Make the forming wheel stick to the vertical steel plate and put the trolley on the welding position.

7. Use the leaning hand grip to make the magnet be on the steel plate to gain enough attraction.

8. Rotate the front/rear and up/down wheels of control parts to align the torch.

9. Turn the control power of the control plate and set the welding speed.

10. Set the beginning position.

11. Set the welding power parameter according to welding condition.

12. Press down the firing switch to begin to welding (and generate arc at the same time).

13. Adjust the welding condition (current flow, voltage, speed and so on) well according to the actual requirement.

14. Stop welding by stop-switch or self-stop switch. (The arc blanks when the trolley stops.)

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.