2. The instrument may contain flammable materials during use, and open flames (or devices that produce sparks) must not be present in the vicinity during operation.

3. When not in use, the instrument should be stored in a dry and well-ventilated location.

4. The power supply shall be single-phase 220V with proper grounding.

5. The instrument must be injected with anhydrous ethanol before starting the test.

6. Never operate the heater in dry conditions without a medium.

7. If the refrigeration unit needs to be restarted after shutdown, a 30-minute interval must be observed; otherwise, the compressor may be damaged.

2. Manual Operation for Reliable Control:
Supporting manual inspection and operation to judge the solidification status, delivering intuitive and dependable results. It offers a cost-effective choice for small-to-medium laboratories and routine quality control scenarios.

3. Modular Control:
Adopting independent digital temperature and time display, allowing real-time monitoring of temperature changes and test duration. The straightforward operation logic minimizes the training requirements.

4. Stable Structure:
Crafted with high-strength materials, offering excellent corrosion resistance and easy cleaning, compatible with long-term use with low-temperature coolants and oil samples, and extending the service life of the instrument.

5. Multi-Station Compatibility:
Adopting the single-bath multi-station design, enabling testing of the solidification point and pour point of multiple samples, supporting high-volume quality control, comparative R&D testing and other diverse testing needs.

Control Panel

The control panel integrates the functions of dual digital display precise temperature control, independent timing and sub-step start/stop, meeting different requirements of various petroleum products for testing temperature and time, and making operation easy, safe and reliable.
　

Stirring Motor

The 22W high-quality stirring motor adopts the low-temperature insulation material and sealing structure, can stably run in the deep cold environment for a long time, and perfectly adapts to the wide temperature testing range of -70˚C~30˚C while ensuring high testing precision.
　

Pour Point Testing Hole

The pour point testing hole meets the standard design requirements for diameter and spacing, can perfectly fit the pour point testing glass tube, effectively reduces the cold loss of the bath and improves the testing precision and compliance.
　

Solidification Point Testing Hole

The solidification point testing hole is equipped with a durable sealing ring, achieving effective sealing and resistance to high and low temperature and corrosion, protecting the test tube from collision and damage and improving the testing safety.
　

Air Vent

The evenly-spaced ventilation holes are designed for achieving efficient heat dissipation and ventilation, protecting internal parts from burnout and damage, prolonging the service life of the instrument and minimizing the maintenance requirements.
　

Testing Auxiliaries

All the auxiliaries are designed for solidification point/pour point testing, do not need to be additionally purchased and reduce the testing cost. The auxiliaries are simple in structure, easy to clean and high in universality, and are suitable for laboratories.
　

1. Pre-test Preparation

(1) Prepare all required testing instruments and materials in accordance with the requirements specified in the standards.

(2) Inspect the power supply to ensure it has a proper grounding terminal, and examine the instrument's casing to confirm it is in a properly grounded condition.

(3) Add an appropriate amount of anhydrous ethanol (industrial alcohol) to the bath tank, ensuring that the test tube holder fits securely without causing overflow into the bath solution.

2. Usage Instruction

(1) Turn on the power switch, and the temperature controller will display the bath temperature. Turn on the stirring switch to initiate bath agitation. Then turn on the cooling switch to activate the refrigeration unit.

(2) Set the bath temperature to the required value according to the testing requirements.

(3) Set the testing time as needed, and turn on the timer switch to start timing. When the number displayed on the LED matches the set value, the buzzer starts sounding. To stop the buzzer, simply turn off the timer switch.

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.