2. Personnel must wear work clothes. Female workers must secure long hair under a work cap and are prohibited from wearing scarves during operations. Unauthorized personnel and minors are not allowed to get close to the work area.

3. Before starting the machine, the operators should completely check the shelling machine, particularly all safety protection parts to ensure that all the parts are not be loosened or lost, and are strictly prohibited from violating the regulations to use it.

4. All tools, metal objects and other things of the shelling machine are strictly prohibited from being placed in the machine frame or feed hopper.

5. The shelling machine's power supply must be connected or disconnected by a qualified electrician, and it must be equipped with reliable grounding, leakage protection and electric shock protection devices.

6. Before starting the machine, the operator must issue the designated signal. The shelling machine must run idle for 10-15 minutes to confirm no abnormalities, and then uniform and continuous feeding operation can be conducted. Before shutdown, idle operation should be conducted for 5-10 minutes to clean away the kernels and shells thoroughly.

7. During the operation of the shelling machine, the operator should constantly pay attention to its rotational speed, sound and bearing temperature rise. If any abnormality is found, the machine should be stopped immediately for inspection. Only after the problem has been eliminated, can the operation continue.

8. After continuously working for a day, the machine should be stopped to check the tightness of components such as the removing rollers, screen body, and each bearing seat, as well as the bolts, and all the parts should be tightened at any time.

9. It is strictly prohibited to carry out maintenance and debugging when the shelling machine is in operation. It is strictly prohibited that the body and other foreign objects approach the transmission parts.

10. When the shelling machine is in operation, it is not allowed to insert hands or other foreign objects into the feeding hopper of the shelling roller.

11. Before starting the machine, the belt safety cover must be fully installed, and is firm and reliable.

12. When the machine needs to be adjusted, the machine must stop running, and should be adjusted, restored and fixed.

Driving Motor

The high-quality motor is adopted to achieve stable driving operation, is small in size and light in weight, has high adaptability and low maintenance cost and reduces the vibration and noise.

　

Control Switches

The double control switches are designed for efficient control over start and stop of the machine, and are safe and reliable, convenient to maintain, high in durability and long in service life.

　

Vibrating Unit

The vibrating unit can efficiently separate shells and nuts to achieve precise grading. The damping springs are adopted to absorb the impact force and reduce the structural fatigue and noise.

　

Protective Cover

The protective cover is used to effectively protect the motor and parts from collision and damage, greatly improving the safety of personnel and equipment and reducing the fault rate.

　

Multi-level Outlet

The multiple outlets are designed for discharging the shells and nuts of multiple specifications, automatically separating shells and nuts during operation, and improving the working efficiency.

　

Adjusting Handwheel

The adjusting handwheel is used to easily adjust the machine to meet different shelling requirements, is easy and convenient to operate and use and improves the practicability.

　

1. Place the machine stably on a flat and solid ground as shown in Figure 1. The ground wire should be connected and buried deeply.

2. After installation is completed, manually check that all transmission parts should rotate smoothly without any jamming.

3. Connect the power cord properly and safely to ensure good insulation, and check the motor connection wires.

B. Adjustment

1. Make sure that the rotation direction of the motor is consistent with the indicated direction. After confirming that there are no errors, start the motor and run it idle for 5 minutes. If there are no abnormal conditions, the operation be carried out.

2. Before preparing the materials to be processed, it is necessary to check the variety, nut size and dryness, and adjust the appropriate gap of the shelling rollers for processing. In this way, it can ensure the crushing rate of the nuts be low. Otherwise, the crushing rate will increase.

3. Take a small quantity of nuts and use the sheller to trial shelling to check the crushing rate.

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.