| 1.
Connect the power supply and ensure the machine is grounded.
2. Briefly activate the start switch
to check the impeller rotation direction (counter-clockwise).
3. During the brief activation or
operation, check for interference between the impeller and the
protective cover. Stop the machine for inspection if any
collision noise is detected.
4. Level the machine on all four
corners before use.
5. A mesh bag or material basket
can be attached to the air outlet to collect broken leaves.
Clear the discharge port in a timely manner to avoid blockage.
6. Hold the celery with both
hands or one hand, place it at the defoliation opening, and pat
or pull it to remove leaves. Repeat the patting and pulling on
both the front and back of the celery.
7. Avoid the central position of
the impeller when removing leaves; defoliation is more effective
near the edge.
8. Control the defoliation rate
by adjusting the patting duration. |
